| Issue |
E3S Web Conf.
Volume 261, 2021
2021 7th International Conference on Energy Materials and Environment Engineering (ICEMEE 2021)
|
|
|---|---|---|
| Article Number | 02044 | |
| Number of page(s) | 5 | |
| Section | Energy Chemistry Performance and Material Structure Analysis | |
| DOI | https://doi.org/10.1051/e3sconf/202126102044 | |
| Published online | 21 May 2021 | |
Finite Element Analysis of Bearing Capacity of Reinforced Concrete Pipe Strengthened by TRC
1
Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, Jiangsu, China.
2
Nanjing Hydraulic Research Institute, Nanjing, 210024, Jiangsu, China.
3
CHONGQING University, Chongqing, 400000, China
* Corresponding author: 18795886768@163.com
A non-linear 3D finite element model was established to simulate the three edge-bearing test of TRC reinforced concrete pipe. The pipe load-displacement curve, cracking load, and ultimate load simulation values are in good agreement with the test values. Subsequently, a parametric study was conducted. The effects of reinforcement layer bonding mode, mesh size of concrete element, mesh distribution rate and concrete compressive strength on the performance of reinforced concrete pipeline strengthened by TRC were considered. It provides a basis for the design of TRC reinforced concrete pipes.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.