| Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
|---|---|---|
| Article Number | 04042 | |
| Number of page(s) | 9 | |
| Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
| DOI | https://doi.org/10.1051/e3sconf/202126404042 | |
| Published online | 02 June 2021 | |
Parameters of the angle-lift of the front plow for smooth, rowless plowing
1 Karshi Engineering Economic Institute, Karshi, Uzbekistan
2 Moscow Agricultural Academy named after K.A.Timiryazeva, Moscow, Russia
3 Karshi branch of Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Karshi, Uzbekistan
* Corresponding author: sherzod.020508@mail.ru
To improve the quality and energy indicators on the front plow in front of the housings, the angle axes are installed in the form of a triangular wedge. The purpose of the study is to substantiate the parameters of the angle-lift of the front plow, which provides high-quality performance of the technological process according to agrotechnical requirements with the lowest energy costs for smooth, rowless plowing. The research uses the laws and rules of theoretical mechanics, mathematical statistics, mathematical planning of experiments, and methods of strain measurement, as well as the methods given in existing regulatory documents. Based on the study of the process of interaction of the carbon monoxide with the soil, analytical dependences are obtained that allow us to determine the parameters of the carbon monoxide. According to the results of theoretical and experimental studies, it was found that the required quality of tillage with a front plow following the established agrotechnical requirements with minimal energy consumption is provided at the height of 22 cm, a length of 27 cm, a wing angle of 32° and an angle of inclination of the side face of 36°.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.