| Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
|---|---|---|
| Article Number | 05006 | |
| Number of page(s) | 9 | |
| Section | Engineering Materials Science, Intelligent Transport Systems and Transport Logistics | |
| DOI | https://doi.org/10.1051/e3sconf/202126405006 | |
| Published online | 02 June 2021 | |
Composite elastomeric materials filled with modified mineral fillers
Tashkent State Transport University, Tashkent, Uzbekistan
* Corresponding author: ibadullaev1957@bk.ru
In the paper, the influence of modified Angren kaolin on the properties of composite elastomeric materials based on butadiene-styrene rubber has been established that the addition of modified Angren kaolin into rubber mixtures instead of gas pedals, activators and mineral fillers causes intensive connection of sulfur with macromolecules. Adsorbed sulfur on the surface of particles of modified Angren kaolin and its uniform distribution in the composition and formation of the structure with equal force were determined. This effect shows that the modified Angren kaolin in the curing processes accelerates and activates and affects the formation of the curing grid with equal strength and helps distribution throughout the composite. It has been established that introduction of MAK into the composition of elastomers more than 50 wt. % per 100 wt. % of rubber changes technological and technical properties of composite elastomeric materials. The application of modified Angren kaolin instead of the gas pedal, activator of vulcanization and mineral filler in composite elastomeric materials allows making rubber goods of various purposes.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.