Issue |
E3S Web Conf.
Volume 272, 2021
2021 International Conference on Environmental Pollution and Governance (ICEPG 2021)
|
|
---|---|---|
Article Number | 01012 | |
Number of page(s) | 4 | |
Section | Environmental Pollution and Pollution Monitoring and Control Technology | |
DOI | https://doi.org/10.1051/e3sconf/202127201012 | |
Published online | 14 June 2021 |
Study of PFS and PAC coagulation effect on Pi River water
College of Architecture and Civil Engineering, West AnHui University Lu’an 237012
* Corresponding author E-mail: 944605217@qq.com
Using poly-aluminum chloride (PAC) and poly-ferric sulfate (PFS) as coagulants, the effects of the dosage of PAC and PFS on the removal of turbidity, chromaticity and UV254* in water were investigated by using the method of enhanced coagulation. The results show that when the raw water is neutral and the turbidity is less than 20NTU, and the pH value does not decrease much after coagulation and sedimentation, PAC and PFS are separately added to 7.5mg/l, 35mg/l. The removal rate of turbidity and chromaticity in the water sample can reach 83.75% and 48.47%, respectively, but the removal rate of UV254* is less than 30%, the mass ratio of PAC to PFS is 1:1 to 6:1, the removal efficiency of turbidity and Chroma increased by about 10%, but the removal efficiency of UV254* did not change or even decreased, both PFS and PAC can effectively remove the turbidity and Chroma in the micro polluted Pi River, but the removal effect of UV254* is not good, and the removal effect of PAC is better than PFS.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.