Issue |
E3S Web Conf.
Volume 274, 2021
2nd International Scientific Conference on Socio-Technical Construction and Civil Engineering (STCCE – 2021)
|
|
---|---|---|
Article Number | 08008 | |
Number of page(s) | 7 | |
Section | Heat Supply, Ventilation, Air Conditioning, Gas Supply, and Lighting | |
DOI | https://doi.org/10.1051/e3sconf/202127408008 | |
Published online | 18 June 2021 |
Treatment of oil-containing wastewater of machine-building enterprises using pressure hydrocyclones
Kazan State University of Architecture and Engineering, 420043 Kazan, Russia
* Corresponding author: kgasu.viv@gmail.com
Wastewater treatment of machine-building enterprises contaminated with oils, petroleum products and mechanical impurities is an urgent task. A promising direction in the field of treatment of such wastewater is the use of pressure hydrocyclones and hydrocyclone installations. The article presents the results of research on the treatment of oil-containing wastewater of machine-building enterprises in pressure of hydrocyclones, conducted on an experimental hydrocyclone installation, which includes the pressure hydrocyclone under test, a sedative tank, and tanks for receiving water from the upper and lower drains of the hydrocyclone. The studies were carried out in two stages: the first stage was used to determine the diameter of the pressure of hydrocyclone suitable for the treatment of oily wastewater, and the second stage was used to study its geometric characteristics. At the first stage, seven modifications of pressure hydrocyclones with a diameter of 40 to 100 mm with different diameters of the upper and lower drain pipes were tested. A 75 mm diameter hydrocyclone is recommended for the treatment of oily wastewater. At the second stage, nine pressure hydrocyclones with a diameter of 75 mm with different diameters of the upper and lower drain pipes were tested. As a result of the experiments, the design parameters of the hydrocyclone that showed the best results were determined. The results of the research were used in the design of industrial hydrocyclone installations.
Key words: Oily wastewater / treatment / hydrocyclone / experimental plant / research / industrial plant
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.