Issue |
E3S Web Conf.
Volume 274, 2021
2nd International Scientific Conference on Socio-Technical Construction and Civil Engineering (STCCE – 2021)
|
|
---|---|---|
Article Number | 08009 | |
Number of page(s) | 8 | |
Section | Heat Supply, Ventilation, Air Conditioning, Gas Supply, and Lighting | |
DOI | https://doi.org/10.1051/e3sconf/202127408009 | |
Published online | 18 June 2021 |
Calculation of soil temperature at the intersection of the heating line of the underground gasket and gas pipeline taking into account real operating conditions
1 Kazan State University of Architecture and Engineering, 420043, Zelenaya st., 1, Kazan, Russia
2 Kazan State Power Engineering University, 420066, Krasnoselskaya st., Kazan, Russia
3 Kazan National Research Technological University, 420015, Karl Marks st., Kazan, Russia
* Corresponding author: akhmerovaag@mail.ru
Distances from the insulation shell of pipelines duringchannelless laying to utility networks are recommended by regulatory documents, but in real conditions it is not always possible to comply with these parameters. Calculations have been made to verify that the gas pipeline can be laid next to the supply pipeline of the heating network in the problematic section of the installation where these restrictions are not met. The soil temperature on the wall of the gas pipeline case is determined to exclude the heating condition of polyethylene pipes above 40 °C for the entire period of operation. Soil temperatures at the intersection of the heating line and the gas pipeline were determined taking into account the real operating conditions of the district heating networks, the peculiarities of regulating the coolant parameters of the Russian heat systems and the state of thermal insulation.
Key words: district heating networks / soil temperature / heat waste
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.