| Issue |
E3S Web Conf.
Volume 300, 2021
2021 2nd International Conference on Energy, Power and Environmental System Engineering (ICEPESE2021)
|
|
|---|---|---|
| Article Number | 01017 | |
| Number of page(s) | 5 | |
| Section | Energy and Power Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202130001017 | |
| Published online | 06 August 2021 | |
Analysis and improvement of the “red/blue spot” of TFT-LCD
1
School of Opto-electronic and Communication Engineering, Xiamen University of Technology, Xiamen 361024, China
2
Consumer Quality Department of Tianma Microelectronics Co., Ltd, Fujian Xiamen 361000, China
* Corresponding author: 2011111002@xmut.edu.cn
“Red/blue spot” is a common undesirable phenomenon in small and medium-sized TFT-LCD products, which directly affects the display quality of the product. It has always been a difficult problem in the display industry, which greatly reduces the market competitiveness of corresponding products. In this work, pressure tests are carried out on liquid crystal panels with different sizes and resolutions. The effects of different factors such as the flatness of the photo space, the distribution density of the spacers, and the glass thickness on the “red/blue spot” are compared. By increasing the flatness of the PS station, the septum distribution density, and the thickness of the glass, the sample’s anti-extrusion ability can be increased by 46.1%, 30%, and 23.1%, respectively. The experimental results can provide the basis for industry to further improve quality of products.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.