| Issue |
E3S Web Conf.
Volume 313, 2021
19th International Stirling Engine Conference (ISEC 2021)
|
|
|---|---|---|
| Article Number | 11002 | |
| Number of page(s) | 7 | |
| Section | Thermal Receivers, Combustors and Heat Exchangers | |
| DOI | https://doi.org/10.1051/e3sconf/202131311002 | |
| Published online | 22 October 2021 | |
Experiment Study of Ignition Characteristics in An Axial-flow-injector Burner for Stirling Engine
Shanghai Marine Diesel Engine Research Institute Editorial Department, Shanghai, China
* Corresponding author: liukun_012@163.com
To investigate the ignition characteristics of an axial-flow injection burner for a Stirling engine, a combustion chamber was designed. Diesel was used as fuel and oxygen as oxidant. The experiments of ignition characteristics were carried out with an electric plug igniter. The ignition characteristics under different combustion chamber pressure, pre-oxygen supply time, oxygen supply flow and ignition position were studied. The experimental results show that, with the increase of the pressure, the ignition time of the burner increases gradually, and the ignition success rate decreases gradually. The oxygen flow rate is related to ignition time in a certain range, while the pre-oxygen supply time has little effect. With the ignition position moving downward, the ignition time decreases gradually.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.