Issue |
E3S Web Conf.
Volume 323, 2021
V International Scientific and Technical Conference Modern Power Systems and Units (MPSU 2021)
|
|
---|---|---|
Article Number | 00019 | |
Number of page(s) | 3 | |
DOI | https://doi.org/10.1051/e3sconf/202132300019 | |
Published online | 10 November 2021 |
A comprehensive model of NOx and SO2 emissions from advanced coal combustion in a complex geometry CLC equipment
1 Jan Dlugosz University in Czestochowa ; A. Krajowej 13/15, 42-200 Czestochowa, Poland
2 Czestochowa University of Technology, Dabrowskiego 73, 42-200 Czestochowa, Poland
3 AGH University of Science and Technology, A. Mickiewicza 30, 30-059 Cracow, Poland
* Corresponding author: j.krzywanski@ujd.edu.pl
The paper describes experiences in the modeling of complex geometry CLC equipment. The facility consists of two reactors: the air reactor and the fuel reactor. The fuzzy logic (FL) methods are used in the study for the prediction of NOx and SO2 from the solid fuels combustion in CLC equipment. Maximum errors between measured and predicted results are lower than 10 %.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.