| Issue |
E3S Web Conf.
Volume 327, 2021
26th Scientific Conference on Power Engineering and Power Machines (PEPM’2021)
|
|
|---|---|---|
| Article Number | 01007 | |
| Number of page(s) | 9 | |
| Section | Thermal Equipment, Heat and Mass Transfer Processes | |
| DOI | https://doi.org/10.1051/e3sconf/202132701007 | |
| Published online | 22 November 2021 | |
Modelling and numerical simulation of fire in a coffee storage hall
University of Chemical Technology and Metallurgy, Department of Silicate Technology, Blvd. Sv. Kliment Ohridski 8, 1756 Sofia, Bulgaria
* Corresponding author: nina@uctm.edu
An approach for modelling of fire in halls at solid materials burning, based on gas phase combustion models in ANSYS/CFX, is proposed. The models are suitable for quick prediction of the flue gases distribution and thermal loads on the building envelopes at a design stage. They was applied for numerical simulation of such processes in a coffee storage hall at different fire positions and forced anti-smoke ventilation. The thermal, fluid flow and concentration field were obtained at the modelled scenarios. Maximal thermal loads on the building envelopes are established at the case of fire near their non-streamlined parts.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.