Issue |
E3S Web Conf.
Volume 356, 2022
The 16th ROOMVENT Conference (ROOMVENT 2022)
|
|
---|---|---|
Article Number | 04023 | |
Number of page(s) | 4 | |
Section | Airflow Visualization, Measurement and Simulation | |
DOI | https://doi.org/10.1051/e3sconf/202235604023 | |
Published online | 31 August 2022 |
Numerical Simulation of Gas-Liquid Two-Phase Leakage of R-290 Refrigerant in Split Air Conditioner
University of Shanghai for Science and Technology,China.
* Corresponding author: zhangqianru@usst.edu.cn
R290 as a refrigerant has significant advantages of low cost, high energy efficiency, and more environmental protection, but the leakage will form a hazardous area inside the indoor unit and the room where the concentration exceeds the lower flammable limit of propane. In this paper, we focus on the gas-liquid two-phase leakage of R-290 indoor air conditioner at the evaporator, and use Computational Fluid Dynamics (CFD) method to numerically simulate the refrigerant leakage dispersion at three air conditioning supply volumes of 178.2 m3/h, 342 m3/h and 576 m3/h, and analyze the indoor velocity distribution and concentration distribution. The results show that the trajectory of the refrigerant jet changes under different air supply volumes, and the simulation results show that the spatial extent of the combustion explosion limit is mainly distributed at the air conditioning leak and the air conditioning outlet. Vortices were formed in the local area above the propane leakage port and then spread.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.