| Issue |
E3S Web Conf.
Volume 376, 2023
International Scientific and Practical Conference “Environmental Risks and Safety in Mechanical Engineering” (ERSME-2023)
|
|
|---|---|---|
| Article Number | 01100 | |
| Number of page(s) | 9 | |
| Section | I Environmental Risks and Safety in Mechanical Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202337601100 | |
| Published online | 31 March 2023 | |
Project management model of motor vehicle development with consideration of built-in quality concept requirements
1 Voronezh State Technical University, Moscow Avenue, 14, 394000, Voronezh, Russia
2 Moscow State University of Civil Engineering, 129337, Yaroslavskoe shosse, 26, Moscow, Russia
3 Moscow Aviation Institute (National Research University), Volokolamskoe shosse, 4, 125993, Moscow, Russia
* Corresponding author: u00781@vgasu.vrn.ru
Problem of long timeframes of new car model development cycle due to excessive testing process of numerous vehicle prototypes is specified. Positive example of solving the problem using digital twin, computer modelling and virtual testing technologies in Formula 1 is given. Positive effect of virtual verification and validation during the development process on built-in product quality and development cycle time reduction is indicated. Existing project management V-models in automotive and information technology industries are reviewed and analyzed. State standards and methodologies of project management, lean manufacturing and digital twin development are reviewed. The improvements based on project life cycle, project management processes and product life cycle are enumerated and explained. Improved V-shaped project management model is described and visualized. The proposed model positive effects are described: it allows to increase the level of built-in vehicle quality, shorten its development cycle timeframes while providing the connection between project management and product development processes.
Key words: car / prototype / planned quality / verification / validation / mathematical modelling / virtual simulation / digital twin / V-model / project management
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.