Issue |
E3S Web Conf.
Volume 383, 2023
International Scientific Conference Transport Technologies in the 21st Century (TT21C-2023) “Actual Problems of Decarbonization of Transport and Power Engineering: Ways of Their Innovative Solution”
|
|
---|---|---|
Article Number | 04028 | |
Number of page(s) | 8 | |
Section | Mechanical Engineering and New Energy Technologies | |
DOI | https://doi.org/10.1051/e3sconf/202338304028 | |
Published online | 24 April 2023 |
Determination of the heat-retaining capacity of layered materials for shoe lining by the method of mathematical planning of the experiment
1
Tashkent Institute of Textile and Light Industry, Street Shohdjahon, 5, 100100 Tashkent, Uzbekistan
2
Tashkent State Pedagogical University, Bunyodkor avenue, 27, 100070 Tashkent Uzbekistan
* Corresponding author: nbmirzaev@mail.ru
A layered composite material for shoes was obtained by the adhesive bonding method. The middle layer of the material consists of a non-woven material made from a mixture of camel and sheep wool, the top and bottom layers consist of cotton jersey, and a polymer adhesive is located between the layers. The layers are bonded by thermal duplication at a temperature of 150±5°C for 2.0±0.2 minutes. As an optimization parameter, the heat-retaining capacity of the material was chosen depending on the thickness, surface density and percentage of camel wool. The strength and thermophysical properties of the layered material are determined.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.