| Issue |
E3S Web Conf.
Volume 385, 2023
2023 8th International Symposium on Energy Science and Chemical Engineering (ISESCE 2023)
|
|
|---|---|---|
| Article Number | 01015 | |
| Number of page(s) | 6 | |
| Section | Energy Development and Utilization and Energy Storage Technology | |
| DOI | https://doi.org/10.1051/e3sconf/202338501015 | |
| Published online | 04 May 2023 | |
Research of Materials and Manufacturing Technology System for On-orbit Manufacturing
Beijing Spacecraft, Beijing 100094, China
Corresponding author Yang Kai email: yk175yy@buaa.edu.cn
On-orbit manufacturing is affected by space microgravity, high vacuum, large temperature variation, strong radiation and other environmental factors, which also puts forward new requirements for materials and process methods suitable for on-orbit manufacturing. This paper summarizes the current research status of different scholars on materials and technologies for on-orbit manufacturing. The main application scenarios and requirements of on-orbit manufacturing are analysed. The technical capability requirements under different application requirements are analysed. Then according to the material source, material use and manufacturability, the material system for in-orbit manufacturing is established. According to different technical requirements, the manufacturing technology system of on-orbit manufacturing is established. From the point of view of materials and technology, the key technical directions that should be broken through in on-orbit manufacturing are put forward. It can provide reference for the subsequent research on materials and process technology of on-orbit manufacturing.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.