| Issue |
E3S Web of Conf.
Volume 389, 2023
Ural Environmental Science Forum “Sustainable Development of Industrial Region” (UESF-2023)
|
|
|---|---|---|
| Article Number | 01085 | |
| Number of page(s) | 7 | |
| Section | Materials Science Innovations, Green Chemistry and Emission Reduction | |
| DOI | https://doi.org/10.1051/e3sconf/202338901085 | |
| Published online | 31 May 2023 | |
Investigation of mechanical properties of composite materials reinforced with carbon fibers
1 Moscow Aviation Institute (National Research University), Volokolamskoe shosse, 4, 125993, Moscow, Russia
* Corresponding author: nbulychev@mail.ru
Theoretical and experimental methods for obtaining and investigating effective thermomechanical characteristics - residual stresses and deformation in panels made of nanomodified materials with asymmetrical reinforcement scheme have been developed in this paper. The study of the residual stress-strain state of structural elements made of carbon plastic using the values of thermoelastic characteristics of composite monolayers identified on the basis of the developed methods meade it possible to reveal the possibility of reducing the residual stress-strain state in structures with asymmetric reinforcement schemes.
Key words: Composites / stress-strain state / strength / elastic properties
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.