Issue |
E3S Web of Conf.
Volume 389, 2023
Ural Environmental Science Forum “Sustainable Development of Industrial Region” (UESF-2023)
|
|
---|---|---|
Article Number | 03061 | |
Number of page(s) | 6 | |
Section | Precision Agriculture Technologies for Crop and Livestock Production | |
DOI | https://doi.org/10.1051/e3sconf/202338903061 | |
Published online | 31 May 2023 |
Impact of composite defoliant on raw cotton yield and the environment
1 Scientific Research Institute for Seed Breeding and Agricultural Texnology of Cotton Growing, Bukhara Scientific Experimental Station, No.309, B. Nakshband, Bukhara, 200100, Uzbekistan
2 Bukhara State University, st. M. Iqbol 11, Bukhara 200100, Uzbekistan
* Corresponding author: r.yunusov@buxdu.uz
The use of a composite defoliant in various norms of Bukhara-8 cotton in the Bukhara region is considered. Identified from 10 options that had a positive impact on the efficiency of defoliation, productivity were - (Mg (ClO3)2liq. 4 l/ha + Fitovak 75 ml/ha + Urea 6.5 + Humin-1.5 kg/ha). The weight of the bolls, the weight of the 1st collection, the gross yield were higher with the control, the standards were respectively heavier by: 0.7-0.9-0.8 g and 4.5-3.7-2.8 c/ha; 5.9-2.2-3.1 q/ha yield increase. The defoliant rate was reduced by 50%, the accumulation of Cl-, MgCl2 salts in the soil, air up to 50%, the ecological environment was saved from damage to the ozone layer Cl- by a certain amount, which affected air pollution. Boll burns under the action of the composite defoliant were not observed, due to the formation of a conductive layer between the leaf and stem, which activates the endohormone triggers contained in Fitovak in plants. The flow of nutrients into the stem to the bolls, bypassing the leaf, through the stem leads to an increase in the mass of the 1st, entire crop and the rate of opening of the bolls.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.