Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
---|---|---|
Article Number | 02060 | |
Number of page(s) | 8 | |
Section | Ecology, Hydropower Engineering and Modeling of Physical Processes | |
DOI | https://doi.org/10.1051/e3sconf/202340102060 | |
Published online | 11 July 2023 |
Application of the method of direct mathematical modeling to diamond-shaped contact lines
Tashkent State Transport University, Tashkent, Uzbekistan
The article describes the application of the numerical method to the investigation of the dynamic interaction of contact lines with current collectors of electric rolling stock (ERS).
The law of joint movement of the runner and the contact wire shall be established. If agap is recorded at anystage, the pressure value is set to zero. From this point on, the flux and contact wire are modeled independently. The contact wire shall be touched by the current collector by the clearance δ. As arule, the introduction into contact is accompaniedbytheintroduction of acurrent collector into the contact wire, which is characterized by negative clearance δ<0. To compensate for the introduction atthepointof contact, there must be an additional «push» force defined by the condition of zero clearance at the end of the stage.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.