Main parameters of manure sealer

Karshi engineering-economics institute

Abstract

The purpose study is to substantiate the main parameters of the slitter for embedding manure in the soil. A slitter has been developed for lifting the formation, forming a gap along the manure strip lying on the surface of the field, pushing it into the gap, and leveling the gap with soil. The slitter includes a rack, large and small cheeks connected to a soil-supporting plate, made with an increasing slope from the bottom to the top towards the small cheek and adjacent to the soil-supporting plate. A window is made in the big cheek for the passage manure. The large cheek is somewhat pushed forward relative to the soil-bearing plate, and its front face is pointed. It is established that when planting fertilizers, the following operations must be carried out: lifting the formation, forming a gap along the manure strip lying on the surface field, pushing the latter into the gap, and leveling the gap with soil. The most acceptable for lifting the formation and the formation of a gap is the working bodies dump type. The following optimal values of the parameters slit are established: the large removal cheek is 710 mm, the width is 200 mm, and the length and height window are 550 and 250 mm, respectively.