| Issue |
E3S Web of Conf.
Volume 406, 2023
2023 9th International Conference on Energy Materials and Environment Engineering (ICEMEE 2023)
|
|
|---|---|---|
| Article Number | 01030 | |
| Number of page(s) | 5 | |
| Section | Biological Device and Material Structure Analysis | |
| DOI | https://doi.org/10.1051/e3sconf/202340601030 | |
| Published online | 31 July 2023 | |
Optimum Design of Ply-up of T800 Carbon Fiber Composite Laminates with Holes
Missile Engineering College, Rocket Force University of Engineering, Shaanxi, Xi an, China
Based on the HyperWorks software, this paper takes the layup sequence of carbon fiber composite laminates as the design variables, the main strain of the laminates and the continuous angle layup not exceeding four layers as constraints, and the maximum bearing capacity as the design goal. The optimized design of the laminate and the corresponding experimental verification were carried out. The experimental results are in good agreement with the simulation analysis results, indicating that the optimization design method proposed in this paper is reasonable.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.