| Issue |
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
|
|
|---|---|---|
| Article Number | 02025 | |
| Number of page(s) | 9 | |
| Section | Agricultural Engineering and Mechanization | |
| DOI | https://doi.org/10.1051/e3sconf/202341302025 | |
| Published online | 11 August 2023 | |
Development of an aluminium matrix composite material with the addition of dispersed particles of graphite, operating under conditions of increased friction
1 Bauman Moscow Technical University, 2-ya Baumanskaya ul., d.5, str.1, 105005 Moscow, Russia
2 Federal State Unitary Enterprise “Federal State Unitary Enterprise All-Russian Scientific Research Institute of Aviation Materials VIAM”, st. Radio, 17, Moscow, Russia
* Corresponding author: rfgrfy10@yandex.ru
The paper proposes a method for obtaining a composite material based on aluminum with the introduction of dispersed particles of graphite powder at the stage of obtaining samples. On the obtained experimental samples, which are cylinders with a diameter of 20 mm. and a height of 10 mm, and the properties of this material, namely hardness and wear resistance.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.