Issue |
E3S Web of Conf.
Volume 415, 2023
8th International Conference on Debris Flow Hazard Mitigation (DFHM8)
|
|
---|---|---|
Article Number | 03014 | |
Number of page(s) | 4 | |
Section | Monitoring, Detection and Warning | |
DOI | https://doi.org/10.1051/e3sconf/202341503014 | |
Published online | 18 August 2023 |
Study of debris-flow initiation through the analysis of seismic signals
1 Department of Biological, Geological, and Environmental Sciences, Università di Bologna, Bologna, Italy
2 Research Institute for Geo-Hydrological Protection (IRPI), National Research Council (CNR), Padova, Italy
3 Faculty of Science and Technology, Free University of Bozen-Bolzano, Bolzano, Italy
* Corresponding author: elena.ioriatti2@unibo.it
Monitoring data gathered in the headwaters of the Gadria catchment, eastern Italian Alps, have been analysed to study debris-flow initiation. The active channel, located at 2200 m a.s.l., was instrumented with a geophone, a time-lapse video camera and a rain gauge. The peak amplitude and duration of the seismic signals and their frequency content were analysed and compared with video images. Results showed that different seismic sources produced signals with different characteristics and that it is possible to discriminate the most intense runoff by analysing the combination of peak amplitude and duration of the seismic signal. The further development of this research would be to create an algorithm able to automatically classify the seismic sources and identify intense channel processes that can generate debris flows. In perspective, the combination of seismic detection in the initiation area with monitoring just above the infrastructures at risk could represent an effective solution to expand the lead time of an early warning system.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.