| Issue |
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
|
|
|---|---|---|
| Article Number | 01288 | |
| Number of page(s) | 12 | |
| DOI | https://doi.org/10.1051/e3sconf/202343001288 | |
| Published online | 06 October 2023 | |
Design, development and modelling of ginning clutch fixture for productivity improvement
1,3-4 Yashwantrao Chavan College of Engineering, Nagpur
2 Shri Ramdeobaba College of Engineering and Management, Nagpur
* Corresponding author: deshpandeyv@rknec.edu
Fixture is one of the important part of machining processes which use for enhancing the efficiency of the process. The conventional ginning clutch fixture is positioned with single fuse body on vertical machining centre. During machining, more time is consumed for loading and unloading which resulted high production time and cost. The solution to an industrial challenge of the design and fabrication of fixture is attempted in the present work. SolidWorks software is used for 3D modelling of novel fixture and stress analysis is performed using ANSYS software which determines the maximum stresses and deformation. Based on the ANSYS results, fixture is fabricated and use for further testing. The ginning clutch fixture was tested during production and was found that the efficiency of the production of ginning clutch was increased by 33%.
Key words: Fixture / ginning clutch / ANSYS / productivity
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.