| Issue |
E3S Web of Conf.
Volume 452, 2023
XV International Online Conference “Improving Farming Productivity and Agroecology – Ecosystem Restoration” (IPFA 2023)
|
|
|---|---|---|
| Article Number | 06016 | |
| Number of page(s) | 7 | |
| Section | Energy-Efficient Construction and Renovation | |
| DOI | https://doi.org/10.1051/e3sconf/202345206016 | |
| Published online | 30 November 2023 | |
Numerical study of the efficiency of single and group centrifugal cyclones
1 Fergana polytechnic institute, 86, Farg'ona 150107, Uzbekista
2 Institute of Mechanics and Earthquake Engineering Academy of Sciences of the Republic of Uzbekistan
* Corresponding author: Madaliev.me2019@mail.ru
Centrifugal cyclones are devices used to separate solids or liquids from gas streams using centrifugal forces. They are widely used in various industrial processes, as well as for purifying air and gases from contaminants. The work carries out numerical modeling and study of the efficiency of single cyclone SCN-50-800 and group cyclone SCN-50-400x4. The study was carried out in the engineering software package Comsol Multiphysics 6.1 using the Flow Simulation add-on, designed for modeling hydrodynamic processes. The v2-f model, which is very often used in swirling flows, was chosen as the turbulence model. The computational experiment was carried out at the same productivity of 4500 m3/h. Based on the obtained numerical data, it is shown that the efficiency of group cyclones is significantly greater than that of single cyclones.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.