Issue |
E3S Web Conf.
Volume 457, 2023
International Scientific and Practical Symposium “The Future of the Construction Industry: Challenges and Development Prospects” (FCI-2023)
|
|
---|---|---|
Article Number | 01015 | |
Number of page(s) | 12 | |
Section | Modern Building Materials | |
DOI | https://doi.org/10.1051/e3sconf/202345701015 | |
Published online | 05 December 2023 |
Study of properties of cements and concrete mixtures with carbon nanotubes
Moscow State University of Civil Engineering, 26, Yaroslavskoye shosse, Moscow, 129337, Russia
Corresponding author: iv.kozlova@mail.ru
The development of nanotechnology contributes to the production of a new generation of multifunctional building materials. Carbon nanotubes (CNTs) are one of the components that make it possible to obtain such materials. CNTs are so small that they are prone to aggregation. To exclude this phenomenon, it is necessary to subject the particles to ultrasonic dispersion and stabilization. The purpose of the study was determined, which is to stabilize CNT suspensions and study of the properties of cements and concrete mixtures containing stabilized CNT particles in their composition. During the research, we have established the optimal dispersion parameters (t = 25±2 °C, υ = 44 kHz, τ<30 min) and the stabilizer concentration (5 g/l). The tests on the compressive strength of modified cement samples showed that the complex additive, which includes polycarboxylates and CNTs, gives the maximum increase in strength in the first day by 60%, in 28 days - by 20%. The introduction of CNTs into the composition of the concrete mix increased the compressive strength by 32% on the 3rd day of hardening, and by 34-39% on the 28th day compared to the control composition without additives.
Key words: carbon nanotubes / complex additive / stabilization / acoustic cavitation / cement stone / concrete mixtures
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.