| Issue |
E3S Web Conf.
Volume 457, 2023
International Scientific and Practical Symposium “The Future of the Construction Industry: Challenges and Development Prospects” (FCI-2023)
|
|
|---|---|---|
| Article Number | 02038 | |
| Number of page(s) | 8 | |
| Section | Integrated Safety in Construction | |
| DOI | https://doi.org/10.1051/e3sconf/202345702038 | |
| Published online | 05 December 2023 | |
Quest - a variant of laboratory work “Investigation of the axial magnetic induction of a solenoid”
1 All-Russian Research Institute of Optical and Physical Measurements, 46, Ozernaya Street, Moscow, Russia
2 Moscow State University of Civil Engineering, 26, Yaroslavskoye shosse, Moscow, 129337, Russia
* Corresponding author: p-igor@inbox.ru
A variant of the laboratory work “Investigation of the axial magnetic induction of the solenoid” is given for the case when the solenoid is located in a separate block and its parameters are unknown. The results of calculations of axial induction of a solenoid with a different ratio of the length of the solenoid to the diameter are given. It is shown that the maximum of the derivative of axial induction in relative length corresponds to the physical end of the solenoid with sufficient accuracy for practice.An algorithm for determining the parameters of a solenoid based on experimental data on measuring the axial induction of the solenoid is described. Laboratory work has a character that orients students to independent research. Processing of digital data is carried out using the Excel program.
Key words: axial magnetic / induction / solenoid / Hall sensor
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.