| Issue |
E3S Web of Conf.
Volume 524, 2024
VII International Conference on Actual Problems of the Energy Complex and Environmental Protection (APEC-VII-2024)
|
|
|---|---|---|
| Article Number | 03044 | |
| Number of page(s) | 5 | |
| Section | General Earth Sciences and Energy Resources | |
| DOI | https://doi.org/10.1051/e3sconf/202452403044 | |
| Published online | 16 May 2024 | |
Modeling of geological and technical measures based on drilling a well with modified valve assembly parameters
Institute of Oil and Gas FSBEI of HE “Ufa State Petroleum Technological University”, (Branch inthe City of Oktyabrsky), 54a, Devonskaya Street, Oktyabrsky, Republic of Bashkortostan, 452607, Russia
* Corresponding author: abd_rima1968@mail.ru
In the course of the research, an analysis of the development of geological and technical measures at various fields was carried out. The justified application of these measures has been studied, and recommendations have been made to increase the efficiency of oil recovery based on drilling wells with modified valve assembly parameters. The conducted research allows us to obtain optimal performance indicators of pumping equipment associated with such parameters as pressure, flow, taking into account the lowest cost of repair work. For this purpose, modeling of geological and technical measures based on drilling a well with modified parameters of the hydraulic assembly of the drilling pump has been developed. This design solution allows you to obtain optimal performance of the drilling pump, taking into account the lowest costs for current and major repairs. These studies aimed at finding optimal geological and technical measures (GTM) related to increasing the productivity of drilling pumps and oil recovery in general are very promising and relevant.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.