Manufacturing full-size panels and frame-filings foam concrete by innovating technologies

Kyrgyz Civil Engineering Institute named after. N.Isanov Kyrgyz State Technical University named after. I. Razzakova, 720020, Bishkek, Kyrgyz Republic

^* Corresponding author: mamatov-zh@kstu.kg

Abstract

This paper is devoted to development of a technological line, technological map and technology of production prefabricated large-sized partition panels and frame fillings on the base of a functioning manufacture prefabricated reinforced concrete products workshop. The territory of the Kyrgyz Republic is one of the most seismically active zones in the Central Asian region. More than 6.3 million people live in Kyrgyzstan. At the same time, the population living in the 9-point zone is about 1.0 million people (including 0.2 million people in Bishkek); in the 8-point zone – 5.1 million people, etc. In accordance with current design standards, the use of brick as frame infill above the fifth floor is prohibited. That’s why, there is a need to use alternative lightweight materials. The production of wall panels and frame fillings from foam concrete will significantly reduce the installation time of walls and significantly reduce the seismic load on the building.