Issue |
E3S Web Conf.
Volume 587, 2024
International Scientific Conference on Green Energy (GreenEnergy 2024)
|
|
---|---|---|
Article Number | 01018 | |
Number of page(s) | 6 | |
Section | Energy Production, Transmission, Distribution and Storage | |
DOI | https://doi.org/10.1051/e3sconf/202458701018 | |
Published online | 07 November 2024 |
Technology development for producing plastic lubricant with secondary raw materials
Tashkent State Transport University, Tashkent, Uzbekistan
* Corresponding author: ayrapetov92@mail.ru
The study explores the possibility of obtaining a new plastic lubricant based on secondary raw materials and local resources. The production of plastic lubricant from waste allows for the replacement of industrial raw materials, which will impact the cost-effectiveness of their production. Moreover, the use of waste ensures environmental safety. A comparative analysis of plastic lubricants was conducted based on all major properties. The properties characterizing modern plastic lubricants were examined, and the most significant operational properties were determined. Market information on plastic lubricants is provided. An analysis of research in the field of plastic lubricants dedicated to import substitution was carried out. The plastic lubricant obtained in laboratory conditions is not inferior in quality to general-purpose lubricants.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.