| Issue |
E3S Web Conf.
Volume 592, 2024
International Scientific Conference Energy Management of Municipal Facilities and Environmental Technologies (EMMFT-2024)
|
|
|---|---|---|
| Article Number | 04018 | |
| Number of page(s) | 7 | |
| Section | Gas and Oil Industry, Pipelines | |
| DOI | https://doi.org/10.1051/e3sconf/202459204018 | |
| Published online | 20 November 2024 | |
Reliability and safety issues of pipeline valves in mechanical engineering
Kazan National Research Technological University, 68, Karla Marksa St., 420015, Kazan, Russia
* Corresponding author: vsi73@mail.ru
The condition for safe operation of technological systems of hazardous production facilities is the correct selection and reliable operation of valves. This paper presents the results of numerical modelling of shut-off valves in dependence on various operating conditions in order to determine their reliable and safe operation. The most common type of valve used is the needle valve. The hydrodynamic and strength conditions of the needle valve are modelled in the Ansys Fluent system. The results obtained made it possible to identify the weak points of the valve studied, to determine the maximum stresses that occur during its operation, and to determine its reliability.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.