| Issue |
E3S Web Conf.
Volume 592, 2024
International Scientific Conference Energy Management of Municipal Facilities and Environmental Technologies (EMMFT-2024)
|
|
|---|---|---|
| Article Number | 05022 | |
| Number of page(s) | 9 | |
| Section | Mining, Geology, Geodesy, and Environmental Monitoring | |
| DOI | https://doi.org/10.1051/e3sconf/202459205022 | |
| Published online | 20 November 2024 | |
Modeling techniques for enhancing barrel-type part casting processes
1 Bauman Moscow State Technical University (BMSTU), 105005 Moscow, Russia
2 Reshetnev Siberian State University of Science and Technology, 660037 Krasnoyarsk, Russia
3 Russian State Agrarian University - Moscow Timiryazev Agricultural Academy, 127550 Moscow, Russia
* Corresponding author: anna_glinskaja@rambler.ru
This article discusses the principles of modeling the casting process for casting parts - “Barrel”. A detailed overview of the casting drawing is provided, as well as the designed 3D model according to this drawing. The values of allowances for the machining of the part are analyzed. The characteristic of the obtained alloy is presented, on the basis of which the calculation of the technological yield of the suitable one is made. At the end of the article, the result of the output of a suitable casting is given.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.