| Issue |
E3S Web Conf.
Volume 601, 2025
The 3rd International Conference on Energy and Green Computing (ICEGC’2024)
|
|
|---|---|---|
| Article Number | 00100 | |
| Number of page(s) | 14 | |
| DOI | https://doi.org/10.1051/e3sconf/202560100100 | |
| Published online | 16 January 2025 | |
Comparative Analysis of Two Mathematical Models of Single Diode Photovoltaic Cells for Extracting PV Parameters Using Levenberg – Marquardt Algorithm
1 LASMAR, Faculty of Sciences, Moulay Ismail University of Meknes, Morocco
2 MIN research Group, LASMAR, ESTM, Moulay Ismail University of Meknes, Morocco
3 SMARTi Laboratory, EMSI Rabat, Morocco
* Corresponding author: youssef.chahet@edu.umi.ac.ma
In this present study, two mathematical models derived from the single-diode model of photovoltaic (PV) cells and modules are evaluated. Moreover, the two mathematical approaches are investigated for the reduced single-diode model and the reduced single-diode combined to Lambert W-function model. The Levenberg-Marquardt optimization algorithm is chosen due to its effectiveness in addressing the complex optimization problems encountered in PV cells modeling. The comparative analysis evaluated the accuracy and computational efficiency of the both models for three PV datasets obtained from the literature. The results demonstrated that the combination of the reduced single-diode with Lambert W-function model achieves a minimum RMSE value of 3.1627×10−4, compared to the reduced single-diode model one of 3.2066×10−4.
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.