Issue |
E3S Web Conf.
Volume 626, 2025
International Conference on Energy, Infrastructure and Environmental Research (EIER 2025)
|
|
---|---|---|
Article Number | 01001 | |
Number of page(s) | 8 | |
Section | GIS and Remote Sensing in Environmental Research | |
DOI | https://doi.org/10.1051/e3sconf/202562601001 | |
Published online | 15 April 2025 |
Transport of pollutants from Pilliga Forest wildfires in northern New South Wales in December 2023 and its impact on air quality
1 Laboratory of Environmental Sciences and Climate Change, Institute for Computational Science and Artificial Intelligence, Van Lang University, Ho Chi Minh City 700000, Vietnam
2 Department of Climate Change, Energy, the Environment and Water (DCCEEW), NSW, PO Box 29, Lidcombe 2141, NSW, Australia
* Corresponding author: hiep.nguyenduc@vlu.edu.vn
In mid-December 2023, a large wildfire occurred in Pilliga Forest, Duck Creek, about 20 km south of the town of Narrabri in northern New South Wales. The fire was started and caused by lightning. It quickly spread due to high temperature at the start of the austral summer. At the end of the fire, totally about 130,000 ha of forest and bushland were burned. Even though it was not large compared to the Black Summer megafires 4 years ago in 2019 which was also started in northern New South Wales near the coast, but this Pilliga Forest wildfire had a widespread impact on air quality over a number of towns and cities in the central and coastal New South Wales areas including the Hunter regions and metropolitan area of Sydney. Of interest is the fast transport of the smoke plumes in the upper troposphere southward inducing pyrocumulonimbus clouds formation and causing thunderstorms along the plume transport path and the intrusion of smoke plumes to the ground over the upper and lower Hunter and the Sydney metropolitan areas causing high particle episodes.
The air quality model WRF-Chem (V4.4.2) is used in this study to analyse the dispersion and transport of air pollutants from the fire emission at Pilliga. The model results give insights on the vertical structure of transported plumes which is also compared and validated with aerosol profiles from ceilometer data at Merriwa, the global MERRA reanalysis data and CALIPSO satellite. Wildfires in remote forest areas by its nature are spontaneous but they can cause widespread effect on air quality in populated areas far from the fire sources. Lessons on the future preparation of these types of wildfires with respect to air quality forecasting in the metropolitan areas will be discussed.
Key words: Pilliga Forest / WRF-Chem / FINN / air quality model / pollutant transport / ceilometer
© The Authors, published by EDP Sciences, 2025
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.