| Issue |
E3S Web Conf.
Volume 693, 2026
International Process Metallurgy Conference (IPMC 2025)
|
|
|---|---|---|
| Article Number | 02009 | |
| Number of page(s) | 6 | |
| Section | Hydrometallurgy and Biohydrometallurgy | |
| DOI | https://doi.org/10.1051/e3sconf/202669302009 | |
| Published online | 09 February 2026 | |
Selective Bioprecipitation of Rare Earth Elements from Bioleachates: The Role of Biorefining
1 Laboratory of Biomining and Biometallurgy, Department of Metallurgical Engineering, Faculty of Mining and Petroleum Engineering, Institut Teknologi Bandung, Bandung 40132, Indonesia
2 Department of Metallurgical Engineering, Institute Technology of Bandung, Indonesia 40132
3 Geomicrobiology-Biomining & Biocorrosion Laboratory, Microbial Culture Collection Laboratory, Directorate of Research and Innovation, Institut Teknologi Bandung, Bandung 40132, Indonesia
* Corresponding author: This email address is being protected from spambots. You need JavaScript enabled to view it.
; This email address is being protected from spambots. You need JavaScript enabled to view it.
Abstract
The selective recovery of Rare Earth Elements (REEs) from red mud leachates is a major challenge due to the presence of interfering metals such as Fe, Al, Ca, and Mg. This review examines microbial bioprecipitation as a promising strategy to improve selectivity in REE recovery. Microorganisms can produce metabolites, such as phosphates, carbonates, and oxalates, that help selectively precipitate REEs from solution, while sulfate-reducing bacteria can remove competing metals through sulfide precipitation. Although research on similar waste streams exists, studies specifically addressing red mud bioleachates are still limited. Key factors affecting selectivity are discussed, including pH, competing ions, metabolite specificity, and microbial strain selection. Integrating microbial bioprecipitation into broader biorefinery processes could enhance the sustainable and efficient recovery of REEs from red mud, contributing to circular economy goals. This review also identifies important research gaps and suggests future directions for scaling up this approach in metallurgical applications.
© The Authors, published by EDP Sciences, 2026
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.

