Thermal expansion coefficient determination of polylactic acid using digital image correlation
E3S Web Conf., 32 (2018) 01007
Published online: 2018-02-21
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Unveiling the hidden threat of microplastic in paper cups and tea bags: a critical review of their exacerbation and alarming concern in India
Vineet Kumar and Pradeep VermaDiscover Applied Sciences 7 (6) (2025)
https://doi.org/10.1007/s42452-025-07121-y
Development of 3D-Printed Vibration Absorbers for Noise Control in Material Removal Processes
Sungmyung Lee, Haewoon Choi and Jonghyun KimMachines 13 (5) 370 (2025)
https://doi.org/10.3390/machines13050370
Influence of the high absorbing nonilluminated surface of the sample on the photothermally induced thermoelastic bending
Marica N. Popovic, Dejan Milicevic, Ljiljana T. Kostic, Vesna V. Miletic and Slobodanka P. GalovicInternational Journal of Thermal Sciences 211 109689 (2025)
https://doi.org/10.1016/j.ijthermalsci.2025.109689
(2024)
https://doi.org/10.2139/ssrn.5026873
Characterization of Thermal Expansion Coefficient of 3D Printing Polymeric Materials Using Fiber Bragg Grating Sensors
Constantina Matsika-Klossa, Nikoleta Chatzidai, Charoula Kousiatza and Dimitrios KaralekasMaterials 17 (18) 4668 (2024)
https://doi.org/10.3390/ma17184668
Optimizing the printing parameters for dimensional accuracy of distal femur bone by using Taguchi’s method
Thoudam Kheljeet Singh, Anil Kumar Birru and Khundrakpam Nimo SinghJournal of Engineering and Applied Science 71 (1) (2024)
https://doi.org/10.1186/s44147-023-00338-x
Multiscale characterisation of the electrical response of 3d printed carbon black polylactic acid
Delbart Robin, Noble Thomas, Roumy Laurane, Fernandez Toribio Juan Carlos, Robert Colin, Truong Hoang Thuy Quynh and Martinez Hergueta FranciscaJournal of Materials Science 58 (32) 13118 (2023)
https://doi.org/10.1007/s10853-023-08840-6
1 (2023)
https://doi.org/10.1109/ONCON60463.2023.10430895
A Novel Low-Cost DIC-Based Residual Stress Measurement Device
Ege Arabul and Alexander J. G. LuntApplied Sciences 12 (14) 7233 (2022)
https://doi.org/10.3390/app12147233
Three-Dimensional-Printed Mechanical Transmission Element with a Fiber Bragg Grating Sensor Embedded in a Replaceable Measuring Head
Piotr Lesiak, Konrad Pogorzelec, Aleksandra Bochenek, Piotr Sobotka, Karolina Bednarska, Alicja Anuszkiewicz, Tomasz Osuch, Maksymilian Sienkiewicz, Piotr Marek, Michał Nawotka and Tomasz R. WolińskiSensors 22 (9) 3381 (2022)
https://doi.org/10.3390/s22093381
3D-printed graphene/polymer structures for electron-tunneling based devices
Deisy C. Carvalho Fernandes, Dylan Lynch and Vikas BerryScientific Reports 10 (1) (2020)
https://doi.org/10.1038/s41598-020-68288-5
A hybrid physics-based and data-driven approach for characterizing porosity variation and filament bonding in extrusion-based additive manufacturing
Azadeh Haghighi and Lin LiAdditive Manufacturing 36 101399 (2020)
https://doi.org/10.1016/j.addma.2020.101399
Laws of 4D Printing
Farhang Momeni and Jun NiEngineering 6 (9) 1035 (2020)
https://doi.org/10.1016/j.eng.2020.01.015
High temperature strain heterogeneities tracking within hole-specimens of FV566 turbine steel via digital image correlation
Jianguang Bao, Adil Benaarbia, Siyuan Bao, et al.Materials Science and Engineering: A 777 139068 (2020)
https://doi.org/10.1016/j.msea.2020.139068