Basic Technologies and Equipment Used for Peat Deposits Development in Foreign Countries
E3S Web Conf., 41 (2018) 01046
Published online: 2018-06-26
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
2526 040003 (2023)
https://doi.org/10.1063/5.0116108
2709 040017 (2022)
https://doi.org/10.1063/5.0106089
Simulation of loads on operating device of peat-cutting unit with regard to errors in the cutting elements arrangement
K. V. FominGornye nauki i tekhnologii = Mining Science and Technology (Russia) 7 (2) 161 (2022)
https://doi.org/10.17073/2500-0632-2022-2-161-169
2709 040003 (2022)
https://doi.org/10.1063/5.0105989
2709 040009 (2022)
https://doi.org/10.1063/5.0106051
Directions for the Rational Use of Additional Organic and Mineral Resources of Peat Deposits
Oleh Misnicow, Alexandr Iablonev, S. Zhironkin, et al.E3S Web of Conferences 278 01014 (2021)
https://doi.org/10.1051/e3sconf/202127801014
Peat Extraction from Lake Sediments in the Northern Districts, the Sakha (Yakutia) Republic
Alexsandra Kuporova, Vladimir Belyakov, S. Zhironkin, et al.E3S Web of Conferences 278 01006 (2021)
https://doi.org/10.1051/e3sconf/202127801006
Medical Peat Waste Upcycling to Carbonized Solid Fuel in the Torrefaction Process
Kacper Świechowski, Małgorzata Leśniak and Andrzej BiałowiecEnergies 14 (19) 6053 (2021)
https://doi.org/10.3390/en14196053
Estimation of Rational Modes and Regimes of Production of Sod Peat with Milling-Forming Machine by Quality Indicators
Anna Guseva, S. Zhironkin, S. Vöth, et al.E3S Web of Conferences 278 01023 (2021)
https://doi.org/10.1051/e3sconf/202127801023
Mutual spectral densities calculation of the moments of resistance on the peat milling unit working bodies
Konstantin FominJournal of Mining Institute 251 745 (2021)
https://doi.org/10.31897/PMI.2021.5.14
Evaluating the impact of excavator bucket capacity on the output of a haul truck in different variants of their positioning
V V Aksenov, D M Dubinkin, A A Khoreshok, et al.Journal of Physics: Conference Series 2052 (1) 012001 (2021)
https://doi.org/10.1088/1742-6596/2052/1/012001
Modernization of Mining Scheme in Developing Peat Deposit
Olga Puhova, Vladimir Lebedev, S. Zhironkin, et al.E3S Web of Conferences 278 01026 (2021)
https://doi.org/10.1051/e3sconf/202127801026
Evaluation of KTT-2 Pneumatic Peat Harvesting Machine’s Nozzle Suction Capacity
Alexander Yablonev, Darya Scherbakova, S. Vöth, et al.E3S Web of Conferences 174 01044 (2020)
https://doi.org/10.1051/e3sconf/202017401044
Influence of Organosilicon Additives on Strength of Sod Peat
Vladimir Belyakov, Alexsandra Kuporova, S. Vöth, et al.E3S Web of Conferences 174 01008 (2020)
https://doi.org/10.1051/e3sconf/202017401008
Method of Expanding Measurement Limits of Digital Dynamometer in Testing Strength of Moulded Peat Products
Alexander Yablonev, Anna Guseva, S. Vöth, et al.E3S Web of Conferences 174 01035 (2020)
https://doi.org/10.1051/e3sconf/202017401035
Effect of Hydro-Physical Properties of Peat on Regulation of Peatland Drainage Systems
Oleg Misnikov, M. Tyulenev, S. Zhironkin, et al.E3S Web of Conferences 105 01010 (2019)
https://doi.org/10.1051/e3sconf/201910501010
Justification of Screw Press Rational Parameters and its Working Modes during Sod Peat Extraction by Milling-forming Method
Alexander Yablonev, Anna Guseva, M. Tyulenev, et al.E3S Web of Conferences 105 01033 (2019)
https://doi.org/10.1051/e3sconf/201910501033