Potential of siliceous fly ash and silica fume as a substitute for binder in cementitious concretes
E3S Web Conf., 49 (2018) 00030
Published online: 2018-08-13
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Roles of alkalinity and carbonate ions concentration of carbonated carbide slag solution in hydration-carbonation kinetics of low-heat Portland cement
Gangchuan Xie, Jingwei Gong, Yizhou Tang, Zhejun Su and Kebin ShiJournal of Building Engineering 120 115542 (2026)
https://doi.org/10.1016/j.jobe.2026.115542
A Review of Fatigue in Concrete of Segmental Bridge Beams: Challenges, High‐Performance Concrete Innovations, and Future Directions
Syed Basit Ali, Yan Liang, Kai Zhang, Muhammad Faizan Ali, Waseem Iqbal, Muhammad Umar, Istehsan Bilal and Ali RazaFatigue & Fracture of Engineering Materials & Structures 49 (2) 323 (2026)
https://doi.org/10.1111/ffe.70114
Rheological characterisation of clay-cement sealing suspensions with fractionated coal fly ashes
Jurij Delihowski and Piotr IzakScientific Reports 16 (1) (2026)
https://doi.org/10.1038/s41598-025-30793-w
Thermo-mechanical optimization of alkali activated materials: Synergistic fiber strategy for high-temperature toughness retention
Yongshun Zhang, Weifeng Zhang, Junfei Zhang, Wenxi Cao, Lei Zhang and Dongmin WangJournal of Building Engineering 114050 (2025)
https://doi.org/10.1016/j.jobe.2025.114050
Cost–Performance Multi-Objective Optimization of Quaternary-Blended Cement Concrete
Yassir M. Abbas, Ammar Babiker, Abobakr Elwakeel and Mohammad Iqbal KhanBuildings 15 (22) 4074 (2025)
https://doi.org/10.3390/buildings15224074
The Investigation of Shear Fracture Toughness and Structure of ITZ of Limestone Concrete with Different Aggregate Grain Size
Grzegorz Ludwik GolewskiMaterials 18 (17) 3954 (2025)
https://doi.org/10.3390/ma18173954
Experimental evaluation of Mode II fracture and microstructure of matrix-aggregate bond of concrete with crushed limestone
Grzegorz Ludwik Golewski, Xinyue Xi, Yuanxun Zheng, Jingbo Zhuo, Peng Zhang and Rafał PanekCase Studies in Construction Materials 23 e05183 (2025)
https://doi.org/10.1016/j.cscm.2025.e05183
Pore Solution, Porosity, and Microstructure of Ternary Cement Matrices: A Holistic and Strategic View of Concrete Durability
Oswaldo Cascudo, Ana Paula de Oliveira, Janine Domingos Vieira and Andrielli Morais de OliveiraJournal of Materials in Civil Engineering 37 (4) (2025)
https://doi.org/10.1061/JMCEE7.MTENG-18439
419 247 (2025)
https://doi.org/10.1007/978-981-97-9777-6_21
Developing sustainable burnt clay bricks incorporating agro-industrial waste
Aneel Kumar, Tauha Hussain Ali, Rabinder Kumar, Waseem Rattar and Mohsin AliMehran University Research Journal of Engineering and Technology 44 (2) 47 (2025)
https://doi.org/10.22581/muet1982.0072
Optimizing compressive strength of quaternary-blended cement concrete through ensemble-instance-based machine learning
Ammar Babiker, Yassir M. Abbas, Mohammad Iqbal Khan and Taghried Abdel-MagidMaterials Today Communications 39 109150 (2024)
https://doi.org/10.1016/j.mtcomm.2024.109150
Analysis of Models to Predict Mechanical Properties of High-Performance and Ultra-High-Performance Concrete Using Machine Learning
Mohammad Hematibahar, Makhmud Kharun, Alexey N. Beskopylny, Sergey A. Stel’makh, Evgenii M. Shcherban’ and Irina RazveevaJournal of Composites Science 8 (8) 287 (2024)
https://doi.org/10.3390/jcs8080287
Effect of Coarse Aggregate Type on the Fracture Toughness of Ordinary Concrete
Grzegorz Ludwik GolewskiInfrastructures 9 (10) 185 (2024)
https://doi.org/10.3390/infrastructures9100185
How Competitive Hydration between C 3 A and C 3 S in the Fast Dissolution Stage Affects the Hydration of Low-Heat Portland Cement Blended Pastes
Gangchuan Xie, Jingwei Gong, Qiang Jin, Miaomiao Gong and Chunmeng JiangJournal of Materials in Civil Engineering 36 (5) (2024)
https://doi.org/10.1061/JMCEE7.MTENG-17069
Enhancement fracture behavior of sustainable cementitious composites using synergy between fly ash (FA) and nanosilica (NS) in the assessment based on digital image processing procedure
Grzegorz Ludwik GolewskiTheoretical and Applied Fracture Mechanics 131 104442 (2024)
https://doi.org/10.1016/j.tafmec.2024.104442
Microstructural and Thermal Characterization of Polyethylene Fiber-Reinforced Geopolymer Composites
Ali Raza, Bilal Ahmed, Mohamed Hechmi El Ouni, Nejib Ghazouani and Wensu ChenJournal of Building Engineering 109904 (2024)
https://doi.org/10.1016/j.jobe.2024.109904
Determination of Fracture Mechanic Parameters of Concretes Based on Cement Matrix Enhanced by Fly Ash and Nano-Silica
Grzegorz Ludwik GolewskiMaterials 17 (17) 4230 (2024)
https://doi.org/10.3390/ma17174230
Using digital image correlation to evaluate fracture toughness and crack propagation in the mode I testing of concretes involving fly ash and synthetic nano-SiO2
Grzegorz Ludwik GolewskiMaterials Research Express 11 (9) 095504 (2024)
https://doi.org/10.1088/2053-1591/ad755e
Hydration and Mechanical Properties of High-Volume Fly Ash Cement under Different Curing Temperatures
Young-Cheol ChoiMaterials 17 (19) 4716 (2024)
https://doi.org/10.3390/ma17194716
Long-Term Performance and Microstructural Characterization of Dam Concrete in the Three Gorges Project
Chen Lyu, Cheng Yu, Chao Lu, Li Pan, Wenwei Li and Jiaping LiuEngineering 33 237 (2024)
https://doi.org/10.1016/j.eng.2023.04.017
Activated Bentonite for Physical, Mechanical, and Durability Properties of Concrete—A Review
Tsion Amsalu Fode, Yusufu Abeid Chande Jande, Thomas Kivevele and Xing WangAdvances in Civil Engineering 2024 (1) (2024)
https://doi.org/10.1155/adce/3849110
A New Insight into Concrete Impermeability: Effect of Polymer Modification of Interfacial Transition Zone
Shuang Yang, Jiantao Wang, Wen Li, Yingxiang Wang and Yunpeng LiuJournal of Testing and Evaluation 51 (6) 3634 (2023)
https://doi.org/10.1520/JTE20230043
Effects of acid attack and cassava flour dosage on the interfacial transition zone thickness, durability and mechanical characteristics of high-strength (HS) concrete
Marwa Gumma Omer Adam, David O. Koteng, Joseph Ng'ang'a Thuo and Mohammed MatallahResults in Engineering 17 101001 (2023)
https://doi.org/10.1016/j.rineng.2023.101001
ITZ microanalysis of cement-based building materials with incorporation of siderurgical aggregates
A. Aghajanian, A. Cimentada, M. Fayyaz, A.S. Brand and C. ThomasJournal of Building Engineering 67 106008 (2023)
https://doi.org/10.1016/j.jobe.2023.106008
The Phenomenon of Cracking in Cement Concretes and Reinforced Concrete Structures: The Mechanism of Cracks Formation, Causes of Their Initiation, Types and Places of Occurrence, and Methods of Detection—A Review
Grzegorz Ludwik GolewskiBuildings 13 (3) 765 (2023)
https://doi.org/10.3390/buildings13030765
Influence of acrylamide in-situ polymerization on the mechanical properties and microstructure of OPC-CSA-Cs-FA quaternary system
Chao Pan, Songhui Liu, Suwan Yao, Xiao Gao, Haibo Zhang, Jianping Zhu, Peiliang Shen, Xuemao Guan and Haiyan LiJournal of Building Engineering 67 105906 (2023)
https://doi.org/10.1016/j.jobe.2023.105906
Assessing of water absorption on concrete composites containing fly ash up to 30 % in regards to structures completely immersed in water
Grzegorz Ludwik GolewskiCase Studies in Construction Materials 19 e02337 (2023)
https://doi.org/10.1016/j.cscm.2023.e02337
Preparation and acceleration mechanism of a ternary hardening accelerator for high-performance concrete with full aeolian sand
Guanglei Qu, Mulian Zheng, Wei Zhang, Haiyang Jing and Zhongwen OuConstruction and Building Materials 369 130629 (2023)
https://doi.org/10.1016/j.conbuildmat.2023.130629
Performance characteristics of cementitious composites modified with silica fume: A systematic review
Yuanfeng Lou, Kaffayatullah Khan, Muhammad Nasir Amin, Waqas Ahmad, Ahmed Farouk Deifalla and Ayaz AhmadCase Studies in Construction Materials 18 e01753 (2023)
https://doi.org/10.1016/j.cscm.2022.e01753
Effect of Coarse Aggregate Grading on Mechanical Parameters and Fracture Toughness of Limestone Concrete
Grzegorz Ludwik GolewskiInfrastructures 8 (8) 117 (2023)
https://doi.org/10.3390/infrastructures8080117
Using ensemble model to predict isothermal hydration heat of fly ash cement paste considering fly ash content, water to binder ratio and curing temperature
Y. Sun and H.S. LeeCase Studies in Construction Materials 18 e01984 (2023)
https://doi.org/10.1016/j.cscm.2023.e01984
Changes in the chemical composition of silica fume in the concrete composite system
Aleš Frýbort, Jana Štulířová, Jiří Grošek and Miroslava GregerováCase Studies in Construction Materials 18 e01916 (2023)
https://doi.org/10.1016/j.cscm.2023.e01916
Valorization of alkaline hydroxide modified coal fly ash to efficient adsorbents for enhanced carbon capture
Ramadurgam Aniruddha, Inkollu Sreedhar and R. ParameshwaranMaterials Today: Proceedings 72 74 (2023)
https://doi.org/10.1016/j.matpr.2022.05.557
Potential industrial approach for efficient dispersion of silica fume: Rapid wet-grinding dispersion technique
Xiaodong Wang, Jingyi Zeng, Changjin Qin, Dingding Tang, Jin Yang, Huang Zhao, Yan Zhou, Hualiang Ye, Bijuan Zheng and Xingyang HeConstruction and Building Materials 401 132893 (2023)
https://doi.org/10.1016/j.conbuildmat.2023.132893
High-temperature behavior of geopolymer mortar containing nano-silica
Peng Zhang, Xu Han, Jinjun Guo and Shaowei HuConstruction and Building Materials 364 129983 (2023)
https://doi.org/10.1016/j.conbuildmat.2022.129983
Effects of extended mixing processes on fresh, hardened and durable properties of cement systems incorporating fly ash
Issara Sereewatthanawut, Chinnapat Panwisawas, Chayut Ngamkhanong and Lapyote PrasittisopinScientific Reports 13 (1) (2023)
https://doi.org/10.1038/s41598-023-33312-x
The Effect of the Addition of Coal Fly Ash (CFA) on the Control of Water Movement within the Structure of the Concrete
Grzegorz Ludwik GolewskiMaterials 16 (15) 5218 (2023)
https://doi.org/10.3390/ma16155218
Effects of the associated incorporation of steel wool and carbon nanotube on the healing capacity and mechanical performance of an asphalt mixture
Luana Schuster, João Victor Staub de Melo and Joe Arnaldo Villena Del CarpioInternational Journal of Fatigue 168 107440 (2023)
https://doi.org/10.1016/j.ijfatigue.2022.107440
Examination of water absorption of low volume fly ash concrete (LVFAC) under water immersion conditions
Grzegorz Ludwik GolewskiMaterials Research Express 10 (8) 085505 (2023)
https://doi.org/10.1088/2053-1591/acedef
Structural behavior of voided reinforced concrete beams having a novel tact bundled waste plastic bottles
Ziadoon M. Ali, Akram S. Mahmoud, Majid S. Mohammed and Mohammed L. AhmedInnovative Infrastructure Solutions 8 (9) (2023)
https://doi.org/10.1007/s41062-023-01205-7
Pure and mixed-mode (I/III) fracture toughness of preplaced aggregate fibrous concrete and slurry infiltrated fibre concrete and hybrid combination comprising nano carbon tubes
Gunasekaran Murali, Sallal R. Abid, Karrar Al‐Lami, Nikolai Ivanovich Vatin, Saurav Dixit and Roman FediukConstruction and Building Materials 362 129696 (2023)
https://doi.org/10.1016/j.conbuildmat.2022.129696
Concrete Composites Based on Quaternary Blended Cements with a Reduced Width of Initial Microcracks
Grzegorz Ludwik GolewskiApplied Sciences 13 (12) 7338 (2023)
https://doi.org/10.3390/app13127338
2558 020025 (2023)
https://doi.org/10.1063/5.0119884
Comparative measurements of fracture toughgness combined with visual analysis of cracks propagation using the DIC technique of concretes based on cement matrix with a highly diversified composition
G.L. GolewskiTheoretical and Applied Fracture Mechanics 121 103553 (2022)
https://doi.org/10.1016/j.tafmec.2022.103553
Shear bond and compressive strength of clay stabilised with lime/cement jet grouting and deep mixing: A case of Norvik, Nynäshamn
Per Lindh and Polina LemenkovaNonlinear Engineering 11 (1) 693 (2022)
https://doi.org/10.1515/nleng-2022-0269
The Specificity of Shaping and Execution of Monolithic Pocket Foundations (PF) in Hall Buildings
Grzegorz Ludwik GolewskiBuildings 12 (2) 192 (2022)
https://doi.org/10.3390/buildings12020192
Mechanical properties improving and microstructure characterization of inorganic artificial stone binder
Yifeng Huang, Lanyu Ma, Wenqin Lai, Qiufeng Mo, Yihua Zheng, Yanming Li, Mengxue Xu and Zhimin HuangScience and Engineering of Composite Materials 29 (1) 335 (2022)
https://doi.org/10.1515/secm-2022-0162
Combined Effect of Coal Fly Ash (CFA) and Nanosilica (nS) on the Strength Parameters and Microstructural Properties of Eco-Friendly Concrete
Grzegorz Ludwik GolewskiEnergies 16 (1) 452 (2022)
https://doi.org/10.3390/en16010452
The Role of Pozzolanic Activity of Siliceous Fly Ash in the Formation of the Structure of Sustainable Cementitious Composites
Grzegorz Ludwik GolewskiSustainable Chemistry 3 (4) 520 (2022)
https://doi.org/10.3390/suschem3040032
Mechanisms and influential variables on the abrasion resistance hydraulic concrete
Jinjun Guo, Minghao Gao, Kun Wang and Peng ZhangNanotechnology Reviews 11 (1) 2997 (2022)
https://doi.org/10.1515/ntrev-2022-0488
Fracture Performance of Cementitious Composites Based on Quaternary Blended Cements
Grzegorz Ludwik GolewskiMaterials 15 (17) 6023 (2022)
https://doi.org/10.3390/ma15176023
Mechanical Performance of Date-Palm-Fiber-Reinforced Concrete Containing Silica Fume
Yasser E. Ibrahim, Musa Adamu, Mohammad Louay Marouf, Omar Shabbir Ahmed, Q. A. Drmosh and Mohammad Abdul MalikBuildings 12 (10) 1642 (2022)
https://doi.org/10.3390/buildings12101642
Performance and runoff coefficient of permeable concretes subjected to heavy rainfall simulations
Nállyton Tiago de Sales Braga, Euler Santos Arruda Junior and Luciana de Nazaré Pinheiro CordeiroMatéria (Rio de Janeiro) 27 (4) (2022)
https://doi.org/10.1590/1517-7076-rmat-2022-0216
Effect of hemp on cement hydration: Experimental characterization of the interfacial transition zone
Fabien Delhomme, Elodie Prud'homme, Clara Julliot, Tina Guillot, Sofiane Amziane and Sandrine MarceauResults in Chemistry 4 100440 (2022)
https://doi.org/10.1016/j.rechem.2022.100440
Machine learning-based mix design tools to minimize carbon footprint and cost of UHPC. Part 1: Efficient data collection and modeling
Cesario Tavares, Xincheng Wang, Sajib Saha and Zachary GrasleyCleaner Materials 4 100082 (2022)
https://doi.org/10.1016/j.clema.2022.100082
An extensive investigations on fracture parameters of concretes based on quaternary binders (QBC) by means of the DIC technique
Grzegorz Ludwik GolewskiConstruction and Building Materials 351 128823 (2022)
https://doi.org/10.1016/j.conbuildmat.2022.128823
Critical review and gap analysis on the use of high-volume fly ash as a substitute constituent in concrete
Yang Li, Boren Wu and Ruijun WangConstruction and Building Materials 341 127889 (2022)
https://doi.org/10.1016/j.conbuildmat.2022.127889
High-temperature behavior of polyvinyl alcohol fiber-reinforced metakaolin/fly ash-based geopolymer mortar
Peng Zhang, Xu Han, Shaowei Hu, Juan Wang and Tingya WangComposites Part B: Engineering 244 110171 (2022)
https://doi.org/10.1016/j.compositesb.2022.110171
Radiological characteristics of Self-Compacting Concretes incorporating fly ash, silica fume, and slag
H. Alperen Bulut and Remzi ŞahinJournal of Building Engineering 58 104987 (2022)
https://doi.org/10.1016/j.jobe.2022.104987
Rheological and viscoelastic characterizations of fly ash/slag/silica fume-based geopolymer
Li Li, Yu-jie Wei, Zongli Li and Muhammad Usman FarooqiJournal of Cleaner Production 354 131629 (2022)
https://doi.org/10.1016/j.jclepro.2022.131629
Studies of Fracture Toughness in Concretes Containing Fly Ash and Silica Fume in the First 28 Days of Curing
Grzegorz Ludwik Golewski and Damian Marek GilMaterials 14 (2) 319 (2021)
https://doi.org/10.3390/ma14020319
The Beneficial Effect of the Addition of Fly Ash on Reduction of the Size of Microcracks in the ITZ of Concrete Composites under Dynamic Loading
Grzegorz GolewskiEnergies 14 (3) 668 (2021)
https://doi.org/10.3390/en14030668
Rheology of Cement Pastes with Siliceous Fly Ash and the CSH Nano-Admixture
Bartosz Szostak and Grzegorz Ludwik GolewskiMaterials 14 (13) 3640 (2021)
https://doi.org/10.3390/ma14133640
Green Concrete Based on Quaternary Binders with Significant Reduced of CO2 Emissions
Grzegorz Ludwik GolewskiEnergies 14 (15) 4558 (2021)
https://doi.org/10.3390/en14154558
Assessing the structural efficiency and durability of burnt clay bricks incorporating fly ash and silica fume as additives
Aneel Kumar, Rabinder Kumar, Vishan Das, Ashfaque Ahmed Jhatial and Tauha Hussain AliConstruction and Building Materials 310 125233 (2021)
https://doi.org/10.1016/j.conbuildmat.2021.125233
Strengthening the very early-age structure of cementitious composites with coal fly ash via incorporating a novel nanoadmixture based on C-S-H phase activators
Grzegorz Ludwik Golewski and Bartosz SzostakConstruction and Building Materials 312 125426 (2021)
https://doi.org/10.1016/j.conbuildmat.2021.125426
Application of the C-S-H Phase Nucleating Agents to Improve the Performance of Sustainable Concrete Composites Containing Fly Ash for Use in the Precast Concrete Industry
Grzegorz Ludwik Golewski and Bartosz SzostakMaterials 14 (21) 6514 (2021)
https://doi.org/10.3390/ma14216514
On the special construction and materials conditions reducing the negative impact of vibrations on concrete structures
Grzegorz Ludwik GolewskiMaterials Today: Proceedings 45 4344 (2021)
https://doi.org/10.1016/j.matpr.2021.01.031
Evaluation of fracture processes under shear with the use of DIC technique in fly ash concrete and accurate measurement of crack path lengths with the use of a new crack tip tracking method
Grzegorz Ludwik GolewskiMeasurement 181 109632 (2021)
https://doi.org/10.1016/j.measurement.2021.109632
Effect of Internal Pores Formed by a Superabsorbent Polymer on Durability and Drying Shrinkage of Concrete Specimens
Il-Sun Kim, So-Yeong Choi, Yoon-Suk Choi and Eun-Ik YangMaterials 14 (18) 5199 (2021)
https://doi.org/10.3390/ma14185199
Energy Savings Associated with the Use of Fly Ash and Nanoadditives in the Cement Composition
Grzegorz Ludwik GolewskiEnergies 13 (9) 2184 (2020)
https://doi.org/10.3390/en13092184
Improvement of Strength Parameters of Cement Matrix with the Addition of Siliceous Fly Ash by Using Nanometric C-S-H Seeds
Bartosz Szostak and Grzegorz Ludwik GolewskiEnergies 13 (24) 6734 (2020)
https://doi.org/10.3390/en13246734
Changes in the Fracture Toughness under Mode II Loading of Low Calcium Fly Ash (LCFA) Concrete Depending on Ages
Grzegorz Ludwik GolewskiMaterials 13 (22) 5241 (2020)
https://doi.org/10.3390/ma13225241
Physico-Mechanical and Rheological Properties of Epoxy Adhesives Modified by Microsilica and Sonication Process
Andrzej Szewczak and Maciej SzelągMaterials 13 (23) 5310 (2020)
https://doi.org/10.3390/ma13235310