Evaluation of properties of AISI 431Grade Stainless Steel by Vacuum Annealing Process
E3S Web Conf., 184 (2020) 01021
Published online: 2020-08-19
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
A review of heat treatments applied to low and medium and high carbon steels used in cold drawn
Luis Humberto Campos BecerraDiscover Materials 5 (1) (2025)
https://doi.org/10.1007/s43939-025-00261-3
Kinetics of Stainless Steel Material by Plasma nitriding Process for sustainable applications
S.N.S. Santhosh Kumar, J. Venkatesh, V. Rahul, J. Gowthaman, D.V.S.S.S.V. Prasad, V.R. Navaneeth, S. Ram and S. Kumar SinghE3S Web of Conferences 552 01006 (2024)
https://doi.org/10.1051/e3sconf/202455201006
Wear assessment on AISI 410 steel by tempering process for constant load and speed sustainable applications
S. Sathish, Bala Murali Nagarajan, Rajesh Kumar, J. Yasin, A. Daniel Das, Banu Seema, Ramaswamy Ram and S. Kumar SinghE3S Web of Conferences 552 01008 (2024)
https://doi.org/10.1051/e3sconf/202455201008
Assessment of wear behavior analysis on normalized martensitic stainless steel for sustainable applications
S. Sathish, T. Beena, V. Rahul, M. Saravana Kumar, A. Daniel Das, Banu Seema, Ramaswamy Ram and S. Kumar SinghE3S Web of Conferences 552 01009 (2024)
https://doi.org/10.1051/e3sconf/202455201009
Dry sliding wear Behaviour analysis on treatedAISI 431 stainless steel material by annealing and tempering process
Ram Subbiah, Anshuman Kumar, V. Rahul, N. Mary Jasmin, P. Sai Pradeep, G. Saravanan and Swadesh Kumar SinghAdvances in Materials and Processing Technologies 10 (4) 2732 (2024)
https://doi.org/10.1080/2374068X.2023.2175406
Investigation of mechanical properties and thermal properties on sugarcane fiber composite material reinforced with polyethylene terephthalate matrix material for sustainable applications
G.J. Saikishore, K. Giridhar Saikiran, V. Chakri, Anshuman K, D.S. Naga Malleswara Rao, G. Saravanan, L.S.P. Subbu and S. Kumar SinghE3S Web of Conferences 552 01004 (2024)
https://doi.org/10.1051/e3sconf/202455201004
Influence of aisi 304 austenitic stainless steel by aqueous soluted nitriding and gas nitriding
G. Keerthi Reddy, Ram Subbaiah, Jajimoggala Sravanthi, Khristina Maksudovna Vafaeva, K. Satyanarayana, P.B. Bobba, A. Perveen and S. DebnathMATEC Web of Conferences 392 01019 (2024)
https://doi.org/10.1051/matecconf/202439201019
Evaluation of wear behavior on AISI 431 by vaccum annealing method for sustainable applications
P. Ravi Kumar, N. Senthil Kannan, J. Dinesh Kumar, P. Sai Pradeep, M. Iyyappan, K.K. Arun, R. Subbu and S. Kumar SinghE3S Web of Conferences 552 01005 (2024)
https://doi.org/10.1051/e3sconf/202455201005
Investigation of tempered AISI 420 SS under dry slided conditions for sustainable applications
S.N.S. Santhosh Kumar, R. Vinoth, Rajesh Kumar, M. Jeevan Kumar, D.V.S.S.S.V. Prasad, S. Prabhu, S. Ram and S. Kumar SinghE3S Web of Conferences 552 01007 (2024)
https://doi.org/10.1051/e3sconf/202455201007
Investigation on AISI 253 Stainless Steel by Gas Nitriding Process for Sustainable Applications
K. Ramyasree, Ramaswamy Subbiah, Tejsingh Chouhan and S. Kumar SinghE3S Web of Conferences 552 01039 (2024)
https://doi.org/10.1051/e3sconf/202455201039
Recent Reviews on Hybrid Nano Reinforcements for Improving Mechanical Properties of Polymers for sustainable applications
Seema B, L. Girisha, Ramaswamy Subbiah, Jeevan T P and S. Kumar SinghE3S Web of Conferences 552 01043 (2024)
https://doi.org/10.1051/e3sconf/202455201043
Nitride treated AISI 304 stainless steel under dry sliding conditions
S. Srikanth, A. Arul Johnson, N. Sateesh, et al.Materials Today: Proceedings 82 47 (2023)
https://doi.org/10.1016/j.matpr.2022.11.262
Investigation of Wear Characteristics on Gas Nitrided AISI 304 Stainless Steel under Dry Sliding Conditions
M. Mamatha Gandhi, Sanjay Kumar, Ramaswamy Subbiah, et al.E3S Web of Conferences 391 01091 (2023)
https://doi.org/10.1051/e3sconf/202339101091
Wear behavior analysis on treated AISI 421 stainless steel under dry sliding conditions
Aravind Deshini, S. Sathish, S. Krishnaraj, et al.Materials Today: Proceedings 82 217 (2023)
https://doi.org/10.1016/j.matpr.2023.01.119
Analysis of Wear Behaviour on AISI 431 Martensitic Stainless Steel by Vacuum Annealing Process
Ram Subbiah, Anshuman Kumar, N. Sateesh, P. Sai Pradeep, Sanjeev Kumar Josh, D. Baloji and S. Swadesh KumarE3S Web of Conferences 430 01016 (2023)
https://doi.org/10.1051/e3sconf/202343001016
Effects of Salt Bath Nitriding Process on AISI 309 Stainless Steel
Santosh Madeva Naik, Upendra Mahatme, M. Iyyappan, et al.E3S Web of Conferences 391 01109 (2023)
https://doi.org/10.1051/e3sconf/202339101109
Assessment of Wear Properties on Treated AISI 410 Martensitic Stainless Steel by Annealing Process
G. Saravanan, V. Rahul, Upendra Mahatme, et al.E3S Web of Conferences 391 01108 (2023)
https://doi.org/10.1051/e3sconf/202339101108
Effects of Plasma Nitriding Process on AISI 304 Stainless Steel
P. Ravi Kumar, K. Manivardhan Reddy, Upendra Mahatme, et al.E3S Web of Conferences 391 01110 (2023)
https://doi.org/10.1051/e3sconf/202339101110
Implementation of taguchi approach on investigation of formability for Al 8011 sheets at elevated temperatures
A. Anitha Lakshmi, Srinivasa Rao Ch., N Sateesh and Ram SubbiahAdvances in Materials and Processing Technologies 8 (sup2) 619 (2022)
https://doi.org/10.1080/2374068X.2021.1945312
Analysis on effect of nanofluid on process parameters in machining of EN19 steel
Sateesh N, Ram Subbiah, BCh Nookaraju, A. Anitha Lakshmi and Prashanth kumar PAdvances in Materials and Processing Technologies 8 (sup3) 1757 (2022)
https://doi.org/10.1080/2374068X.2021.1953918
Wear and microstructure analysis on AISI420 stainless steel by annealing & tempering process under dry sliding conditions
Animesh Bain, Keerthi Reddy, Saranya Jagadeesan, et al.Advances in Materials and Processing Technologies 8 (sup2) 445 (2022)
https://doi.org/10.1080/2374068X.2021.1945308
Assessment of Wear Behavior on Treated AISI 630 Stainless Steel by Salt Bath Nitriding Process under Dry Sliding Conditions
D. Raguraman, B. Ramakrishna Reddy, N. Sateesh, et al.E3S Web of Conferences 309 01169 (2021)
https://doi.org/10.1051/e3sconf/202130901169
Performance analysis of peel test on fused filament fabricated polypropylene-aluminium
A. Felix Sahayaraj, N. Senthil Kannan, L. Girisha, et al.Materials Today: Proceedings 47 5075 (2021)
https://doi.org/10.1016/j.matpr.2021.05.246
Dry Sliding Wear Behavior of Austenitic Stainless Steel Material by Gas Nitriding Process
K. Ramya Sree, D. Raguraman, J. Saranya, et al.E3S Web of Conferences 309 01181 (2021)
https://doi.org/10.1051/e3sconf/202130901181