Improvement of the out-of-furnace steel treatment technology for improving its mechanical properties
E3S Web of Conf., 365 (2023) 05002
Published online: 2023-01-30
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Development of a continuous extra-furnace steel processing unit
V. A. Murashov, K. V. Strogonov, A. K. Bastynets and D. D. LvovIzvestiya. Ferrous Metallurgy 68 (1) 98 (2025)
https://doi.org/10.17073/0368-0797-2025-1-98-105
Research of the influence of the technological parameters of the steelmaking process on the design and defect formation of large-sized castings for freight cars
Otabek Toirov and Nodirjon TursunovVibroengineering Procedia 58 271 (2025)
https://doi.org/10.21595/vp.2025.24958
Development of resource-saving composition of sand-clay mixtures for steel castings with improved physical and chemical characteristics
Otabek Toirov, Nodirjon Tursunov and Lochinbek KuchkorovVibroengineering Procedia 58 277 (2025)
https://doi.org/10.21595/vp.2025.24959
Experimental and theoretical study of the efficiency of solid slag mixtures for desulfurization of 20GL steel under conditions of induction crucible melting
Nodirjon Tursunov, Azizjon Saidirakhimov and Otabek ToirovVibroengineering Procedia 58 283 (2025)
https://doi.org/10.21595/vp.2025.24961
Improving the bitumen properties with the introduction of energy-saving additives
Alimjon Riskulov, Akhmadjon Ibodullaev, Khurshidbek Nurmetov, Kholida Khojakhmedova and D. BazarovE3S Web of Conferences 401 03029 (2023)
https://doi.org/10.1051/e3sconf/202340103029
The effect comparative evaluation of energy saving additives on the bitumen properties
Alimjon Riskulov, Takhira Sidikova, Rovshan Khakimov, Jamshed Avliyokulov and D. BazarovE3S Web of Conferences 401 03069 (2023)
https://doi.org/10.1051/e3sconf/202340103069
Optimization of the operation of the mechanism of the cross planer
Sherali Mamayev, Anna Avdeeva, Oleg Ablyalimov, Dilnoza Nigmatova and D. BazarovE3S Web of Conferences 401 05026 (2023)
https://doi.org/10.1051/e3sconf/202340105026
Modeling of the process of mechano activation of filler particles in polymer composites
Umida Ziyamukhamedova, Hatice Evlen, Jasurbek Nafasov, Zilola Jalolova, Elbek Turgunaliyev, Erkin Rakhmatov and D. BazarovE3S Web of Conferences 401 05027 (2023)
https://doi.org/10.1051/e3sconf/202340105027
Steeling of synthetic cast iron in induction crucible furnace taking into account consumption rate of carburizers
Murot Turakulov, Nodirjon Tursunov, Salokhiddin Yunusov and D. BazarovE3S Web of Conferences 401 05012 (2023)
https://doi.org/10.1051/e3sconf/202340105012
Creation of special compositions based on butadiene-nitrile elastomers for diesels
Sherali Mamayev, Axmadjan Ibadullayev, Dilnoza Nigmatova, Elmira Teshabayeva, Mukhsinjon Tursunaliev and D. BazarovE3S Web of Conferences 401 03028 (2023)
https://doi.org/10.1051/e3sconf/202340103028
Investigation of heat exchange processes in the lining of induction furnaces
Tokhir Tursunov, Nodirjon Tursunov, Talgat Urazbayev and D. BazarovE3S Web of Conferences 401 05029 (2023)
https://doi.org/10.1051/e3sconf/202340105029
Development of technology for formation of AI-B-N system joints under influence of high pressures and temperatures to create composite tool material
Sherzod Fayzibayev, Oleg Ignotenko, Talgat Urazbaev, Sherali Mamayev, Jasur Nafasov and D. BazarovE3S Web of Conferences 401 05016 (2023)
https://doi.org/10.1051/e3sconf/202340105016
Study of the operational properties of the bolster of a freight car bogie
Dilmira Valieva, Salokhiddin Yunusov, Nodirjon Tursunov and D. BazarovE3S Web of Conferences 401 05017 (2023)
https://doi.org/10.1051/e3sconf/202340105017
Efficiency of using heat-insulating mixtures to reduce defects of critical parts
Otabek Toirov, Nodirjon Tursunov and D. BazarovE3S Web of Conferences 401 05018 (2023)
https://doi.org/10.1051/e3sconf/202340105018
The effect comparative evaluation of energy-saving additives on the bitumen properties
Alimjon Riskulov, Takhira Sidikova, Rovshan Khakimov, Jamshed Avliyokulov and D. BazarovE3S Web of Conferences 401 05028 (2023)
https://doi.org/10.1051/e3sconf/202340105028
Development of technology for high-strength cast iron for manufacturing D49 head of cylinder
Uchkun Rakhimov, Nodirjon Tursunov and D. BazarovE3S Web of Conferences 401 05013 (2023)
https://doi.org/10.1051/e3sconf/202340105013
Shafts of technological machines with combined supports
S. Z. Yunusov, S. N. Kenjayev, Sh. A. Makhmudova and D. BazarovE3S Web of Conferences 401 01059 (2023)
https://doi.org/10.1051/e3sconf/202340101059
Material selection for vehicle brake chamber case with using computer methods of analysis
Alimjon Riskulov, Khurshidbek Nurmetov, Jamshed Avliyokulov and D. BazarovE3S Web of Conferences 401 02061 (2023)
https://doi.org/10.1051/e3sconf/202340102061