Development of technology for manufacturing molding and core mixtures for obtaining synthetic cast iron
E3S Web of Conf., 365 (2023) 05006
Published online: 2023-01-30
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Experimental and theoretical study of the efficiency of solid slag mixtures for desulfurization of 20GL steel under conditions of induction crucible melting
Nodirjon Tursunov, Azizjon Saidirakhimov and Otabek ToirovVibroengineering Procedia 58 283 (2025)
https://doi.org/10.21595/vp.2025.24961
Improving the bitumen properties with the introduction of energy-saving additives
Alimjon Riskulov, Akhmadjon Ibodullaev, Khurshidbek Nurmetov, Kholida Khojakhmedova and D. BazarovE3S Web of Conferences 401 03029 (2023)
https://doi.org/10.1051/e3sconf/202340103029
The effect comparative evaluation of energy saving additives on the bitumen properties
Alimjon Riskulov, Takhira Sidikova, Rovshan Khakimov, Jamshed Avliyokulov and D. BazarovE3S Web of Conferences 401 03069 (2023)
https://doi.org/10.1051/e3sconf/202340103069
Influencing engagement angle on power parameters in flat-belt gears
Sirozhiddin Kenjayev, Salokhiddin Yunusov, Mukhammatsidik Abdurakhimov, Dilafruz Ahmedova and D. BazarovE3S Web of Conferences 401 05005 (2023)
https://doi.org/10.1051/e3sconf/202340105005
Optimization of the operation of the mechanism of the cross planer
Sherali Mamayev, Anna Avdeeva, Oleg Ablyalimov, Dilnoza Nigmatova and D. BazarovE3S Web of Conferences 401 05026 (2023)
https://doi.org/10.1051/e3sconf/202340105026
Steeling of synthetic cast iron in induction crucible furnace taking into account consumption rate of carburizers
Murot Turakulov, Nodirjon Tursunov, Salokhiddin Yunusov and D. BazarovE3S Web of Conferences 401 05012 (2023)
https://doi.org/10.1051/e3sconf/202340105012
Shafts of technological machines with combined supports
S. Z. Yunusov, S. N. Kenjayev, Sh. A. Makhmudova and D. BazarovE3S Web of Conferences 401 01059 (2023)
https://doi.org/10.1051/e3sconf/202340101059
Development of technology for high-strength cast iron for manufacturing D49 head of cylinder
Uchkun Rakhimov, Nodirjon Tursunov and D. BazarovE3S Web of Conferences 401 05013 (2023)
https://doi.org/10.1051/e3sconf/202340105013
Investigation of heat exchange processes in the lining of induction furnaces
Tokhir Tursunov, Nodirjon Tursunov, Talgat Urazbayev and D. BazarovE3S Web of Conferences 401 05029 (2023)
https://doi.org/10.1051/e3sconf/202340105029
Development of technology for formation of AI-B-N system joints under influence of high pressures and temperatures to create composite tool material
Sherzod Fayzibayev, Oleg Ignotenko, Talgat Urazbaev, Sherali Mamayev, Jasur Nafasov and D. BazarovE3S Web of Conferences 401 05016 (2023)
https://doi.org/10.1051/e3sconf/202340105016
Efficiency of using heat-insulating mixtures to reduce defects of critical parts
Otabek Toirov, Nodirjon Tursunov and D. BazarovE3S Web of Conferences 401 05018 (2023)
https://doi.org/10.1051/e3sconf/202340105018
The effect comparative evaluation of energy-saving additives on the bitumen properties
Alimjon Riskulov, Takhira Sidikova, Rovshan Khakimov, Jamshed Avliyokulov and D. BazarovE3S Web of Conferences 401 05028 (2023)
https://doi.org/10.1051/e3sconf/202340105028