Analyzing the Competency of 3D Printing Technology in Architectural, Interior and Product Design
E3S Web of Conf., 410 (2023) 04014
Published online: 2023-08-09
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
743 595 (2026)
https://doi.org/10.1007/978-981-95-1822-7_62
Effect of interlayer reinforcement on the axial cyclic behaviour of RC prisms with 3D-printed formwork: experimental testing and analytical model
Luis de la Flor Juncal, Allan Scott, Don Clucas and Giuseppe LoporcaroJournal of Building Engineering 116289 (2026)
https://doi.org/10.1016/j.jobe.2026.116289
3D printing for the reinterpretation of architectural heritage: Proposal of a model
Gencay ÇubukCultural Heritage and Science 5 (1) 24 (2024)
https://doi.org/10.58598/cuhes.1415522
Influence of printing parameters on the durability of 3D-printed limestone calcined clay cement mortar: overlap between filaments and nozzle offset
L. de la Flor Juncal, G. Loporcaro, A. Scott and D. ClucasMaterials and Structures 57 (8) (2024)
https://doi.org/10.1617/s11527-024-02451-6
295 (2024)
https://doi.org/10.23919/FRUCT64283.2024.10749921
Leveraging 3D Printing for Resilient Disaster Management in Smart Cities
Antreas Kantaros, Florian Ion Tiberiu Petrescu, Konstantinos Brachos, Theodore Ganetsos and Nicolae PetrescuSmart Cities 7 (6) 3705 (2024)
https://doi.org/10.3390/smartcities7060143