Issue |
E3S Web Conf.
Volume 9, 2016
3rd European Conference on Unsaturated Soils – “E-UNSAT 2016”
|
|
---|---|---|
Article Number | 01001 | |
Number of page(s) | 15 | |
Section | European Distinguished Lecture | |
DOI | https://doi.org/10.1051/e3sconf/20160901001 | |
Published online | 12 September 2016 |
Unsaturated railway track-bed materials
Ecole des Ponts ParisTech, U.R. Navier/CERMES, 6 – 8 av. Blaise Pascal, Cité Descartes, Champs – sur – Marne, 77455 Marne – la – Vallée cedex 2, France
Railway track-bed materials are mostly in unsaturated state, and their hydro-mechanical properties depend strongly on their water contents or suctions. In France, problematic soils such as collapsible loess and swelling marl can be origin of instability problems for new lines for high speed trains, while the hydro-mechanical behaviour of interlayer soil formed mainly by interpenetration of ballast and subgrade soil is of concern for conventional lines. In the latter case, the main challenge relies in the large variability of the interlayer soils owing to the variability of natural subgrade soils involved in the railway network. In this paper, a study on interlayer soils is presented, that covers a large spectrum of aspects: geotechnical/geophysical site characterisation, laboratory investigation into the hydraulic behaviour and mechanical behaviour as well as the mud pumping/interlayer creation phenomena, and field monitoring. The combined effect of water content and fines content were emphasized in the laboratory investigation, whilst interaction between atmosphere and track was focused on in the field monitoring. The results show clearly that it is of paramount importance to consider the unsaturated aspect of track-bed materials when analysing the overall behaviour of tracks, in particular when clay is involved in fine fraction.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.