Experimental verification of shrinkage due to drying in concrete under varying humidity conditions in accordance with the Eurocode2 standard

EDP Kielce University of Technology, Al. Tysiąclecia P.P. 7, Kielce, Poland

^* Corresponding author: wiolar@tu.kielce.pl

Abstract

The concrete shrinkage depends on many factors. There are the concrete mixture, dimensions of the element and environment conditions, mainly humidity. All these factors can be imposed under laboratory conditions and controlled. In field conditions, however, a constant humidity is not possible to keep. The paper presents the impact of relative humidity changes on the values of shrinkage strains. The experimental results obtained on the specimens (with size 150x150x600 mm) were compared with the values calculated in accordance with the Eurocode 2 standard. The specimens were made with basalt aggregate without admixtures or additives. Two kinds of cement were used in preparing the specimens: Portland and blast-furnace slag cement. All specimens were treated in water for 10 days in the first days after demoulding and then subjected to testing. During the 56 days the temperature was 22 ± 2°C, while the humidity decreased proportionally from 91% to 47%. Strains were measured and the specimens were weighed to determine the mass loss. The experimental results were compared to the computational results. It should be concluded that they were not coherent in the case of ambient humidity exceeding 80% although it was accordance with the Eurocode 2 standard.