Issue |
E3S Web Conf.
Volume 51, 2018
2018 3rd International Conference on Advances on Clean Energy Research (ICACER 2018)
|
|
---|---|---|
Article Number | 03006 | |
Number of page(s) | 5 | |
Section | Environmental Remediation and Quality Assessment | |
DOI | https://doi.org/10.1051/e3sconf/20185103006 | |
Published online | 24 August 2018 |
An air circulation purifying system based on PLC
School of Metallurgy, Northeastern University,
Shenyang, Liaoning Province,
China
* Corresponding author: dut@smm.neu.edu.cn
Existing air purifiers are mostly indoor air circulation, and most of them cannot achieve indoor and outdoor air circulation and provide fresh air to room. At the same time, the current air purifier filter on the market after absorbing a large amount of dust and other pollutants, if not replaced in time, is likely to cause secondary pollution. In response to these problems, this paper carried out an exploratory research that can achieve indoor and outdoor air purification device. According to the clean air volume of HEPA filter, the pressure of fan and the cross-sectional area of filter are determined, meanwhile, the air resistance of indoor and outdoor circulating air purifier, the effect of air blower on air purification efficiency and filter CADR are discussed in detail. According to the filtering characteristics of single-layer filter, a kind of indoor and outdoor circulating air purifier-single-layer filter type air purifier was designed. Among the air purifier, the PLC control circuit is used to achieve single-layer filter air purifier filter automatically replace.
© The authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.