| Issue |
E3S Web Conf.
Volume 56, 2018
VII International Scientific Conference “Problems of Complex Development of Georesources” (PCDG 2018)
|
|
|---|---|---|
| Article Number | 02017 | |
| Number of page(s) | 7 | |
| Section | Geomechanical Problems of Development of Subsoil | |
| DOI | https://doi.org/10.1051/e3sconf/20185602017 | |
| Published online | 26 September 2018 | |
Evaluation of geomechanical conditions at Magnezitovaya mine when undermining natural and anthropogenic objects
Institute of Mining of the Ural Division of Russian Academy of Sciences, Yekaterinburg, Russia
* Corresponding author: roman_krinicyn@mail.ru
Development of Satka magnesite deposit is carried out in complicated geomechanical conditions, in particular, mining works are conducted under the Bolshaya Satka river, in the zone of influence of the existing and developed quarries. Underground workings undermine a number of surface objects of industrial and civil purpose: railways, bridges, buildings and structures. There was an urgent need to conduct special studies of geomechanical conditions at the mine in order to assess the feasibility of working off part of the safety pillars located under the railway tracks of "Russian Railways", PJSC and the river bed. In the process of research, the main physical and mechanical properties of rocks have been identified, and the initial natural stresses of the rock mass have been measured. An increased level of horizontal initial stresses in the zone of safety pillars at the horizons + 180. + 260 m was detected. Based on the results of the research, a conclusion was made on the need to develop some engineering measures to ensure the safety of underground works. It was recommended, to ensure the stability of the rocks massif, to apply the option of extracting the treatment chambers with the formation of the ceiling of the vaulted form. It is proposed to monitor deformation processes in mine workings and on the daylight surface. To this end, the installation of an automated control system for rock pressure is recommended. It is necessary to provide for the establishment of long-term observation stations for controlling rock pressure and displacement. According to the results of the research, "Guidelines for the safe control of mining operations at bump-hazardous Satka magnesite deposit" have been developed in accordance with the requirements of the Federal norms and regulations in industrial safety.
Key words: Physical and mechanical properties of rocks / Initial stresses of rock massifs / Fullscale measurements / Laboratory tests / Slit discharge / Safety pillars / Undermining of industrial and civil objects
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.