| Issue |
E3S Web Conf.
Volume 56, 2018
VII International Scientific Conference “Problems of Complex Development of Georesources” (PCDG 2018)
|
|
|---|---|---|
| Article Number | 03014 | |
| Number of page(s) | 7 | |
| Section | Problems of Complex Processing of Mineral Raw Materials and New Technologies of Mineral Processing | |
| DOI | https://doi.org/10.1051/e3sconf/20185603014 | |
| Published online | 26 September 2018 | |
Sorting out of Gusevogorsk deposit titaniferous magnetite ore by technological types by methods of geoinformation modeling and preliminary estimation of their washability
Institute of Mining, Ural Branch of the Russian Academy of Sciences, Ekaterinburg, Russia
* Corresponding author: quality@igduran.ru
A more complete and complex extraction of valuable components in the development of mineral resources is achieved through the separation of technological types and grades of ores, their separate extraction and processing, which allows to increase the yield, quality and nomenclature of commercial products and to raise the economic efficiency of the extraction and preparation processes. An important element of the separate processing of types of ores is the technology used for their zoning by grades in the open-pit space. Innovative direction in the development of the forecast of quality and preparation characteristics of mineral resources is the methods of geoinformation modeling with the use of Geological and Mining Information System technologies. The paper describes the technique of modeling and separation of ores into technological grades on the example of the Gusevogorskoye deposit of titanomagnetites, and presents the method of express ore preparability analysis with the estimation of the degree of contrast of qualitative characteristics.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.