Issue |
E3S Web Conf.
Volume 70, 2018
17th International Conference Heat Transfer and Renewable Sources of Energy (HTRSE-2018)
|
|
---|---|---|
Article Number | 01015 | |
Number of page(s) | 6 | |
Section | Renewable Energy Sources and Energy Storage | |
DOI | https://doi.org/10.1051/e3sconf/20187001015 | |
Published online | 03 December 2018 |
Design of thermal energy storage unit for Compressed Air Energy Storage system
Warsaw University of Technology, Faculty of Power and Aeronautical Engineering, Nowowiejska 24, 00-665 Warsaw, Poland
* Corresponding author: mjawo@itc.pw.edu.pl
The aim of this paper is to present a new concept of a high-temperature thermal energy storage (TES) for the application in the compressed air energy storage (CAES) systems. The proposed storage unit combines the advantages of pressurized containers with packed beds, e.g. of rocks, with the strengths of non-pressurized systems such as those encountered in CSP plants. Designed TES unit consists of the heat exchanger located inside a high-temperature thermocline-type vessel with molten HITEC® salt used as a heat storing material. In terms of the geometry of the designed heat exchanger, a tube-in-tube helical coil type was chosen due to its higher convective heat transfer coefficients in comparison with straight tubes. To find the most suitable case, four helical coils with different dimensions (diameter, pitch) were considered. Heat transfer and pressure drop analysis for each configuration were conducted. In particular, convective and overall heat transfer coefficients as well as friction factors were computed based on the empirical correlations. To verify the obtained results, the analysis based on numerical approach has been carried out with the use of ANSYS Fluent software for the most suitable case.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.