| Issue |
E3S Web Conf.
Volume 113, 2019
SUPEHR19 SUstainable PolyEnergy generation and HaRvesting Volume 1
|
|
|---|---|---|
| Article Number | 01014 | |
| Number of page(s) | 9 | |
| Section | Sustainable Power Plants | |
| DOI | https://doi.org/10.1051/e3sconf/201911301014 | |
| Published online | 21 August 2019 | |
Packed-bed sensible thermal energy storage system using demolition wastes for concentrated solar power plants
1
Çukurova University, Central Research Laboratory (CUMERLAB), Adana, Turkey
2
Faculty of Arts and Sciences, Chemistry Department, Cukurova University, Adana, Turkey
This paper presents a study on development of a packed-bed storage system for CSP applications. In this system, demolition wastes from urban regeneration projects in Turkey has been investigated as potential STESM for cost effective storage systems. Schumann’s two-phase one-dimensional model was used to evaluate the optimal design parameters. Effect of operational and geometrical design parameters such as mass velocity, porosity, aspect ratio of packed bed, packing diameter were assessed on storage performance. The system showed the best performance with low bed void fraction, low mass flow rate and low Rep.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.