Issue |
E3S Web Conf.
Volume 73, 2018
The 3rd International Conference on Energy, Environmental and Information System (ICENIS 2018)
|
|
---|---|---|
Article Number | 05012 | |
Number of page(s) | 4 | |
Section | Environmental Technology and Pollution Control | |
DOI | https://doi.org/10.1051/e3sconf/20187305012 | |
Published online | 21 December 2018 |
Design of Groundwater Filtration Technology to Meet the Clean Water Needs of Rural Communities Using Quality Function Deployment
Department of Industrial Engineering, Faculty of Engineering, Diponegoro University, Semarang - Indonesia
* Corresponding author: sriyanto@ftundip.ac.id
The provision of clean water for all Indonesians is one of the objectives of the government that is still constrained by the limitations of the existing water supply infrastructure. Some areas, especially rural or remote areas, are still hard to reach by the clean water facilities of the Regional Water Company. Whereas the groundwater resources in this region are abundant but can't be explored optimally to meet the needs of clean water and proper consumption for the surrounding community. The availability of water is not balanced with its quality, especially as qualified water for consumption. Some other characteristics of rural areas such as poor sanitation and the presence of agricultural waste pollutants, result in groundwater quality being further away from the standard of consumption. Although there are some commercial water filtration technologies available, they are generally expensive, with limited capacity, and not intended for mass use. For that reason, a new breakthrough, by designing proper technology, which is not only affordable but also easy to use and have sufficient capacity to meet the needs of the community. This research used Quality Function Deployment followed by Functional Analysis Systems Technique to get the character of the user and design requirement of groundwater filtration technology which suitable with the community needs and water quality condition in rural areas. The result is a design of filtration technology consists of five main modules, namely filtration module, information module high voltage module, reactor module, and rack module. This design is expected to be the basis for developing clean water technologies for people in rural areas or others that are difficult to reach by the Regional Water Company infrastructure.
Key words: Groundwater filtration / Rural areas / Quality Function Deployment
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.