Improving the energy efficiency of power transmissions of a rolling stock on the basis of dynamic anisotropy of frictional contact

Rostov State Transport University, 344038 Rostov-on-Don, Russia

^* Corresponding author: tmt@rgups.ru

Abstract

The analysis showed the following tendencies of development and energy efficiency of designs of gearboxes for track machines: provision of a maximum level of efficiency, removal of rupture of a stream of the passed capacity, provision of a high level of reliability, decrease of power input on gearbox work, provision of convenience, simplicity of service and steering, engine braking maintenance, and also maintenance of a relatively low cost. The above-mentioned tasks are performed by including clutch pinion gears with the built in frictional amplifier elements in an automatic gearbox, and also during the effect of dynamic anisotropy of frictional bonds. Besides a torque transfer, the clutch gear carries out a safety clutch function. That means that there is sliding at a high rotational power. Factor of strengthening of the given link is К_str → ∞ due to occurence of dynamic anisotropy of frictional bonds. Physical and mechanical characteristics of contacting surfaces are formed in the course of dynamic interaction of roughnesses in friction units at modes of dry and boundary friction. Essential-nonlinear friction processes, interconnected with dynamic processes on the contact area, define values of target characteristics of frictional system. They can fluctuate in a very wide range. The friction factor f_mp for the same friction units at preservation of constant conditions and friction parameters can vary from zero to infinity that is an essence of dynamic anisotropy of frictional bonds.