| Issue |
E3S Web Conf.
Volume 105, 2019
IVth International Innovative Mining Symposium
|
|
|---|---|---|
| Article Number | 01026 | |
| Number of page(s) | 7 | |
| Section | Environment Saving Mining Technologies | |
| DOI | https://doi.org/10.1051/e3sconf/201910501026 | |
| Published online | 21 June 2019 | |
Justification of the Calculation Method for Arch Support with Rock Grouting
T.F. Gorbachev Kuzbass State Technical University, 650000, Kemerovo, Russian Federation
* Corresponding author: ipeb@kuzstu.ru
This paper proposes a new method for calculating arch support with grouted space behind the support. The analysis of existing installations and methods for the calculation of frame supports was made. It has been established that the existing methods of frame parts calculation do not take into account the presence of grouted space behind the support. It is proposed to take into account the presence of the grouted layer in the space behind the support when it interacts with the rock mass. The formation of partially disturbed rock adjacent to the grouted layer is taken into account in the behaviour of rocks. In this method, the arch support is replaced with a ring support. The finite element method establishes the reduced dimensions of the ring support and its module of linear deformations, corresponding to these values of the arch support when its bearing capacity is lost. The scheme for calculating arch support ultimately boils down to considering the interaction of the support, the grouted layer, the zone of partially destroyed rocks and the rest of the mass of intact rocks in the hydrostatic field of rock pressure.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.